标准规范中文版翻译 Archivers

标准规范中文版翻译 » Archivers » DIN 德语标准数据库参考目录 29

 

 DIN IEC 48B/784/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25: Section 4: Propagation delay test procedure (IEC 48B/784/CD:1999) 24页
DIN IEC 48B/785/CD-1999 Detail specification for rectangular connectors with non-removable ribbon cable contacts on 1,25 mm pitch single row used with high speed serial data connector (HSSDC) (IEC 48B/785/CD:1999) 98页
DIN IEC 48B/796/CD-2000 Connectors for use in d.c. and low frequency analogue and digital high speed data applications - Part 2-102: Circular connectors with assessed quality; detail specification for plugs and jacks for coupling an external low-voltage power supply (IEC 48B/79 57页
DIN IEC 48B/803/CD-2000 Connectors with assessed quality for use in d.c., low frequency analogue and digital high speed data applications - Part 2: Detail specification for circular connectors with screw and snap-in coupling M8 and M12 for low voltage switchgear and controlgear 95页
DIN IEC 48B/822/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1-1: General examination; Test 1a: Visual examination (IEC 48B/822/CD:1999) 7页
DIN IEC 48B/823/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1-2: General examination; Test 1b: Examination of dimension and mass (IEC 48B/823/CD:1999) 7页
DIN IEC 48B/824/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance, Millivolt level method (IEC 48B/824/CD:1999) 7页
DIN IEC 48B/825/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2-2: Electrical continuity and contact resistance test; Test 2b: Contact resistance, specified test current method (IEC 48B/825/CD:1999) 7页
DIN IEC 48B/826/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation (IEC 48B/826/CD:1999) 7页
DIN IEC 48B/827/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2-5: Electrical continuity and contact resistance tests; Test 2e: Contact disturbance (IEC 48B/827/CD:1999) 5页
DIN IEC 48B/828/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2-6: Electrical continuity and contact resistance tests; Tests 2f: Housing (shell) electrical continuity (IEC 48B/828/CD:1999) 7页
DIN IEC 48B/829/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 3-1: Insulation tests; Test 3a: Insulation resistance (IEC 48B/829/CD:1999) 7页
DIN IEC 48B/830/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 4-1: Voltage stress tests; test 4a: Voltage proof (IEC 48B/830/CD:1999) 6页
DIN IEC 48B/831/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 4-2: Voltages stress tests; tests 4b: Partial discharge (IEC 48B/831/CD:1999) 6页
DIN IEC 48B/832/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 4-3:Voltage stress tests; test 4c: Voltage proof of pre-insulated crimp barrels (IEC 48B/832/CD:1999) 4页
DIN IEC 48B/833/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 5-1: Current-carrying capacity tests; test 5a: Temperature rise (IEC 48B/833/CD:1999) 6页
DIN IEC 48B/834/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 5-2: Current-carrying capacity tests; test 5b: Current temperature derating (IEC 48B/834/CD:1999) 12页
DIN IEC 48B/835/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6-1: Dynamic stress tests; test 6a: Acceleration, steady state (IEC 48B/835/CD:1999) 7页
DIN IEC 48B/836/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6-2: Dynamic stress tests; test 6b: Bump (IEC 48B/836/CD:1999) 6页
DIN IEC 48B/837/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6-2: Dynamic stress tests; test 6c: Shock (IEC 48B/837/CD:1999) 7页
DIN IEC 48B/838/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6-4: Dynamic stress tests; test 6d: Vibration (sinusoidal) (IEC 48B/838/CD:1999) 7页
DIN IEC 48B/839/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-2: Climatic tests; tests b: Combined/sequential cold, low air pressure and damp heat (IEC 48B/839/CD:1999) 8页
DIN IEC 48B/840/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-3: Climatic tests; tests 11c: Damp heat, steady state (IEC 48B/840/CD:1999) 10页
DIN IEC 48B/841/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-4: Climatic tests; tests 11d: Rapid change of temperature (IEC 48B/841/CD:1999) 8页
DIN IEC 48B/842/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-5: Climatic tests; tests 11e: Mould Growth (IEC 48B/842/CD:1999) 8页
DIN IEC 48B/843/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-6: Climatic tests; tests 11f: Corrosion, Salt mist (IEC 48B/843/CD:1999) 7页
DIN IEC 48B/844/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-9: Climatic tests; tests 11i: Dry Heat (IEC 48B/844/CD:1999) 10页
DIN IEC 48B/845/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-10: Climatic tests; test 11j: Cold (IEC 48B/845/CD:1999) 9页
DIN IEC 48B/846/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-11: Climatic tests; tests 11k: Low air pressure (IEC 48B/845/CD:1999) 8页
DIN IEC 48B/847/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-12: Climatic tests; test 11m: Damp heat, cyclic (IEC 48B/847/CD:1999) 9页
DIN IEC 48B/848/CD-2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11-13: Climatic tests; tests 11n: Gas thightness, colderless wrapped connections (IEC 48B/848/CD:1999) 7页
DIN IEC 48B/868/CD-2000 Connectors with assessed quality, for use in d.c., low frequency analogue and digital high speed data applications - Part 2-103: Circular connectors; detail specification for a range of multipole circular connectors (type "XLR") (IEC 48B/868/CD:200 56页
DIN IEC 48B/869/CD-2000 Return loss test procedure for electrical connectors, sockets, cable assemblies or interconnection devices (IEC 48B/869/CD:2000) 18页
DIN IEC 48D/119/CD-1997 Dimensions of mechanical structures of the 482,6 mm (19in) series - Part 5: Subracks and associated plug-in for EMC, ESD, injector/extractor and keying (IEC 48D/119/CD:1997) 47页
DIN IEC 48D/142/CD-1998 Sectional specification for outdoor enclosures (IEC 48D/142/CD:1997) 15页
DIN IEC 48D/143/CD-1998 Detail specification for cabinets - Outdoor enclosures (IEC 48D/143/CD:1997) 13页
DIN IEC 48D/144/CD-1998 Detail specification for cases - Outdoor enclosures (IEC 48D/144/CD:1997) 13页
DIN IEC 48D/151/CDV-1998 Electromagnetic shielding performance tests for cabinets, racks and subracks (IEC 48D/151/CDV:1998) 20页
DIN IEC 48D/193/CD-1999 Draft IEC 61969-3: Outdoor enclosures - Part 3: Climatic, mechanical tests and safety aspects for cabinets and cases (IEC 48D/193/CD:1999) 18页
DIN IEC 48D/90/CD-1995 Seismic tests for cabinets and racks (IEC 48D/90/CD:1995) 14页
DIN IEC 49(CO)233-1992 A spezifikation in the IEC quality assessment; system for electronic components (IECQ); generic specification: piezoelectric ceramic filters for use in electronic equipment; identical with IEC 49(Central Office)233 22页
DIN IEC 49(CO)234-1992 A specification in the IEC quality assessment; system for electronic components (IECQ); sectional specification: piezoelectric ceramic filters for use in electronic equipment; identical with IEC 49(Central Office)234 22页
DIN IEC 49(CO)236-1992 A specification in the IEC quality assessment system for electronic components (IECQ); blank detail specification: piezoelectric ceramic filters for use in electronic equipment (qualification approval), assessment level E; identical with IEC 49(Central O 11页
DIN IEC 49(CO)245-1992 Quartz crystal units for frequency control and selection; part 2: guide to use of quartz crystal units for frequency control and selection; section one: quartz crystal units for microprocessor clock supply; amendment 1 to IEC 60122-2-1; identical with IE 7页
DIN IEC 49(Sec)230-1992 Terms and definitions for waveguide type dielectric resonators; identical with IEC 49(Secretariat)230 6页
DIN IEC 49(Sec)250-1993 Measurement method of relative permittivity for dielectric resonator materials at microwave frequency; identical with IEC 49(Secretariat)250 19页
DIN IEC 49(Sec)266-1994 Amendment 1 to IEC 60758, second edition, 1993; inspection rules of synthetic quartz crystal and lumbered synthetic quartz crystal (IEC 49(Secretariat)266:1993) 9页
DIN IEC 49/296/CD-1995 Waveguide type dielectric resonators - Part 1: General information and test conditions; Section 2: Test conditions (IEC 49/296/CD:1995) 33页
DIN IEC 49/316/CD-1996 Draft amendment to IEC 60444-1:1986 - Measurement of quartz crystal unit parameters - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 49/316/C 14页
DIN IEC 49/319/CD-1996 Electrostatic discharge sensitivity classification (IEC 49/319/CD:1996) 15页
DIN IEC 49/327/CD-1996 Piezoelectric filters - A specification in the IEC quality assessement system for electronic components (IECQ) - Generic specification (capability approval) (IEC 49/327/CD:1996) 58页
DIN IEC 49/328/CD-1996 Piezoelectric filters - A specification in the IEC quality assessment system for electronic components (IECQ) - Sectional specification (capability approval) (IEC 49/328/CD:1996) 63页
DIN IEC 49/329/CD-1996 Piezoelectric filters - A specification in the IEC quality assessement system for electronic components (IECQ) - Blank detail specification (capability approval) (IEC 49/329/CD:1996) 17页
DIN IEC 49/335/CD-1996 Filters using waveguide type dielectric resonators - Part 1: General information, standard values and test conditions; Section 2: Test conditions (IEC 49/335/CD:1996) 23页
DIN IEC 49/337/CD-1996 Amendment 1 to IEC 60444-5: Standards of the measurement of surface mounted quartz crystal units (IEC 49/337/CD:1996) 10页
DIN IEC 49/359/CD-1997 Draft IEC 862-2: Surface acoustic wave (SAW) filters - Part 2: Guide to the use of surface acoustic wave filters (IEC 49/359/CD:1996) 106页
DIN IEC 49/363/CD-1997 A standardized test procedure for the characterization of latch up in crystal controlled oscillators CMOS integrated circuits (IEC 49/363/CD:1996) 24页
DIN IEC 49/365/CD-1997 Glossary for piezoelectric and dielectric devices for frequency control and selection - Part 2: Piezoelectric and dielectric filters (IEC 49/365/CD:1997) 15页
DIN IEC 49/399/CD-1998 IEC 60122-3: Quartz crystal units for frequency control and selection - Part 3: Standard outlines and lead connections (IEC 49/399/CD:1997) 59页
DIN IEC 49/400/CD-1998 IEC 60368-3: Piezoelectric filters - Part 3: Standard outlines (IEC 49/400/CD:1997) 31页
DIN IEC 49/401/CD-1998 IEC 60679-3: Quartz crystal controlled oscillators - Part 3: Standard outlines and lead connections (IEC 49/401/CD:1997) 69页
DIN IEC 49/418/CD-1998 Draft amendment A2 to IEC 60758: Synthetic quartz crystal - Specifications and guide to the use (German version IEC 49/418/CD) 27页
DIN IEC 49/419/CD-1998 IEC 61994-4-1: Glossary for piezoelectric and dielectric devices for frequency control and selection - Part 4-1: Piezoelectric materials; Glossary for synthetic quartz crystal (IEC 49/419/CD:1998) 8页
DIN IEC 50/395/CD-1-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; introduction (IEC 50/395/CD:1997 sectionalized) 18页
DIN IEC 50/395/CD-2-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-1 to the environmental tests of IEC 60068: storage (IEC 50/395/CD:1997 sectionalized) 19页
DIN IEC 50/395/CD-3-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-2 to the environmental tests of IEC 60068; transportation (IEC 50/395/CD:1997 sectionalized) 24页
DIN IEC 50/395/CD-4-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-3 to the environmental tests of IEC 60068; stationary use at weatherprotected locations (IEC 50/395/CD:1997 sectionalize 23页
DIN IEC 50/395/CD-5-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-4 to the environmental tests of IEC 60068; stationary use at non-weatherprotected locations (IEC 50/395/CD:1997 sectiona 22页
DIN IEC 50/395/CD-6-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-5 to the environmental tests of IEC 60068; ground vehicle installations (IEC 50/395/CD:1997 sectionalized) 16页
DIN IEC 50/395/CD-7-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-6 to the environmental tests of IEC 60068; ship environment (IEC 50/395/CD:1997 sectionalized) 21页
DIN IEC 50/395/CD-8-1997 Environmental testing - Part 4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3-7 to the environmental tests of IEC 60068; portable and non-stationary use (IEC 50/395/CD:1997 sectionalized) 25页
DIN IEC 509-1997 可再充电的封闭式钮扣镍镉电池 11页
DIN IEC 50A/329/CDV-1997 Environmental testing - Part 2: Tests methods; test Ff: Vibration, time-history method (IEC 50A/329/CDV:1996) 38页
DIN IEC 50B/357/CD-1995 Environmental testing - Part 2: Tests; test R: Water; revision of IEC 60068-2-18 (IEC 50B/357/CD:1995) 94页
DIN IEC 51(CO)272-1988 Information on ferrite materials appearing in manufacturer's catalogues of transformer and inductor cores; revision of IEC 60401; identical with IEC 51(Central Office)272 6页
DIN IEC 51(Sec)295-1993 Dimensions of magnetic oxide cores intended for use in power supply applications (ETD-cores); amendment 1 to IEC 51(Central Office)276; identical with IEC 51(Secretariat)295 6页
DIN IEC 51/363/DIS-1995 Draft Amendment to IEC 431: Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts (IEC 51/363/DIS:1995) 15页
DIN IEC 51/386/CD-1995 Amendment 1 to IEC 60635: Toroidal strip-wound cores made of magnetically soft material (IEC 51/386/CD:1995) 4页
DIN IEC 51/387/CD-1995 Amendment 1 to IEC 60329: Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment (IEC 51/387/CD:1995) 9页
DIN IEC 51/421/CDV-1996 Amendment 1 to IEC 60556 (IEC 51/421/CDV:1996) 10页
DIN IEC 51/493/CD-1998 Cores made of soft magnetic materials - Measuring methods - Part 3: Measurements at high excitation levels (IEC 51/493/CD:1997) 49页
DIN IEC 51/516/CD-1998 Dimensions of low profile cores made of magnetic oxides (IEC 51/516/CD:1998) 15页
DIN IEC 51/525/CD-1999 Revision of IEC 60133: Pot-cores made of magnetic oxides - Dimensions and associated parts (IEC 51/525/CD:1998) 22页
DIN IEC 51/526/CD-1999 Revision of IEC 60205: Calculation of the effective parameters of magnetic piece parts (IEC 51/526/CD:1998) 42页
DIN IEC 51/527/CD-1999 IEC 61631: Test method for the mechanical strength of cores made of magnetic oxides (IEC 51/527/CD:1998) 17页
DIN IEC 512-11-8-1996 电子设备用机电元件.基本试验程序和测量方法;第1部分:总则 3页
DIN IEC 512-2 A1-1995 电子设备用机电元件.基本试验规程和测量方法.第2部分:一般检查.电流连续性和接触电阻测试、绝缘试验和电压应力试验.修订A1 2页
DIN IEC 52(CO)249-1985 Printed circuits; rework, repair, modification; identical with IEC 52(CO)249 12页
DIN IEC 52(CO)303-1988 Printed boards; artwork for production; identical with IEC 52(Central Office)303 20页
DIN IEC 52(Sec)476-1994 IEC 61189-3: Test methods for interconnection structures (Printed boards) - Test E07: Controlled impedance testing by Time Domain Reflectometry (TDR) (IEC 52(Secretariat)476:1994) 40页
DIN IEC 52(Sec)477-1994 IEC 61189-3: Test methods for interconnection structures (Printed boards) - Test E08: PTH resistance change, thermal cycling (IEC 52(Secretariat)477:1994) 11页
DIN IEC 52(Sec)497-1995 Printed circuits - Terms and definition (IEC 52/91(Sec)497/48:1994 and IEC 52/91(Sec)497A/48A:1994) 268页
DIN IEC 52/520/CD-1995 IEC 61249-8-1: Materials for interconnection structures - Part 8: Nonconductive films and coatings; section 1: Adhesive coated flexible polyester film (IEC 52/520/CD:1994) 16页
DIN IEC 52/569/CD-1996 IEC 61189-2: Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (IEC 52/569/CD:1995) 81页
DIN IEC 52/570/CD-1996 IEC 61189-2: Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (IEC 52/570/CD:1995) 77页
DIN IEC 52/572/CD-1996 Design and use of printed board assemblies - Part 5: Sectional design and use requirements; attachment (land/joint) considerations; section 1: Generic requirements (IEC 52/572/CD:1995) 132页
DIN IEC 52/573/CD-1996 Design and use of printed board assemblies - Part 5: Sectional design and use requirements - Attachment (Land/joint) considerations; section 2: Discrete components (IEC 52/573/CD:1995) 106页
DIN IEC 52/574/CD-1996 Design and use of printed boards and printed board assemblies - Part 5: Sectional design and use requirements; attachment (Land/joint) considerations; Section 3: Components with Gull-wing leads on two sides (IEC 52/574/CD:1995) 59页
DIN IEC 52/575/CD-1996 Design and use of printed boards and printed board assemblies - Part 5: Sectional design and use requirements; attachment (Land/joint) considerations; section 4: Components with J leads on two sides (IEC 52/575/CD:1995) 21页
DIN IEC 52/576/CD-1996 Design and use of printed boards and printed board assemblies - Part 5: Sectional design and use requirements; attachment (Land/joint) considerations; section 5: Components with Gull-wing leads on four sides (IEC 52/576/CD:1995) 65页
DIN IEC 52/577/CD-1996 Design and use of printed boards and printed board assemblies - Part 5: Sectional design and use requirements; attachment (Land/joint) considerations; section 6: Components with J leads on four sides (IEC 52/577/CD:1995) 37页
DIN IEC 52/578/CD-1996 Design and use of printed boards and printed boards assemblies - Part 5: Sectional design and use requirements - Attachment (Land/joint) considerations; section 7: Components with Post (DIP) mounting leads on two sides (IEC 52/578/CD:1995) 19页
DIN IEC 52/639/CD-1996 Guidance on the use of IEC/ISO publications and quality assessment systems - Part 1: Guide to the use of the IECQ system for quality assessment for printed boards and printed board assemblies (IEC 52/639/CD:1996) 14页
DIN IEC 52/640/CD-1996 Guidance on the use of IEC/ISO publications and quality assessment systems - Part 2: Guide to the implementation of ISO 9000 quality standards within the IECQ system for printed board and printed board assemblies (IEC 52/640/CD:1996) 13页
DIN IEC 52/643/CD-1996 Amendment 1 to IEC 61189-1: Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology (IEC 52/643/CD:1996) 14页
DIN IEC 52/644/CD-1996 Amendment 3 to IEC 61189-2: Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (IEC 52/644/CD:1996) 8页
DIN IEC 52/645/CD-1996 Amendment 3 to IEC 61189-3: Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (IEC 52/645/CD:1996) 23页
DIN IEC 52/669/CD-1997 Bow and twist requirements - Amendment to IEC 60249-2-1 to 7, 9, 10, 14, 16, 18; Sub-clause 5.3 und 6.3 (IEC 52/669/CD:1996) 9页
DIN IEC 52/670/CDV-1997 Introduction of a new subclause 6.6 to IEC 60249-2-4, 60249-2-5, 60249-2-11 and 60249-2-12 - Concerning the requirements for glass transition temperature and cure factor (IEC 52/670/CDV:1996) 5页
DIN IEC 52/674/CD-1997 IEC 62326-2: Printed boards - Part 2: Rigid single and double-sided printed boards without interlayer connections; sectional specification (IEC 52/674/CD:1996) 54页
DIN IEC 52/675/CD-1997 IEC 62326-2-1: Printed boards - Part 2: Rigid single and double-sided printed boards without interlayer connections; Section 1: Capability detail specification; performance level A, B und C (IEC 52/675/CD:1996) 83页
DIN IEC 52/676/CD-1997 IEC 62326-3: Printed boards - Part 3: Rigid single and double-sided printed boards with interlayer connections; sectional specification (IEC 52/676/CD:1996) 62页
DIN IEC 52/677/CD-1997 IEC 62326-3-1: Printed boards - Part 3: Rigid single and double-sided printed boards with interlayer connections; Section 1: Capability detail specification; performance level A, B und C (IEC 52/677/CD:1996) 96页
DIN IEC 52/686/CDV-1997 IEC 61188-2: Design and use of printed boards and printed board assemblies - Part 2: Guide to the use of printed wiring board substrate materials; surface mount technology (IEC 52/686/CDV:1996) 32页
DIN IEC 52/757/CDV-1998 IEC 61249-2-19: Materials for interconnection structures - Part 2: Sectional specification set for reinforced base materials clad and unclad; section 19: High temperature epoxide cross-plied coherent linear fibreglass laminated sheet of defined flammabil 37页
DIN IEC 544-2-1996 确定绝缘材料受电离辐射影响的导则.第2部分:辐照和试验规程 17页
DIN IEC 55(CO)277-1984 Addition to publication 60251 (new version); methods of test of winding wires, clause 14: continuity of covering 6页
DIN IEC 55(CO)291-1985 Winding wires; revision of publication IEC 60182-2 and 60182-2A; maximum overall diameters of enamelled round winding wires; identical with IEC 55(Central Office)291 4页
DIN IEC 55(CO)292-1985 Winding wires; amendment to publication IEC 60317-X; minimum increase in diameter due to insulation; identical with IEC 55(Central Office)292 4页
DIN IEC 55/602/CDV-1997 Specifications for particular types of winding wires; Modification of IEC 60317-2, IEC 60317-4, IEC 60317-19, IEC 60317-20, IEC 60317-21, IEC 60317-23, IEC 60317-35, IEC 60317-36, Clause 17: Solderability (IEC 55/602/CDV:1997) 6页
DIN IEC 55/620/CDV-1997 Proposal for designation of particular types of winding wires according IEC 60317 series (IEC 55/620/CDV:1997) 7页
DIN IEC 55/621/CDV-1998 Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 55/621/CDV:1997) 13页
DIN IEC 55/622/CDV-1998 Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 55/622/CDV:1997) 14页
DIN IEC 55/623/CDV-1998 Specification for particular types of winding wires - Amendment to IEC 60317-2 Clause 18: Heat or solvent bonding (IEC 55/623/CDV:1997) 7页
DIN IEC 55/624/CDV-1998 Specifications for particular types of winding wires - Amendment to IEC 60317-35 Clause 18: Heat or solvent bonding (IEC 55/624/CDV:1997) 8页
DIN IEC 55/625/CDV-1998 Specifications for particular types of winding wires - Amendment to IEC 60317-36 Clause 18: Heat or solvent bonding (IEC 55/625/CDV:1997) 8页
DIN IEC 55/626/CDV-1998 Specifications for particular types of winding wires - Amendment to IEC 60317-37 Clause 18: Heat or solvent bonding (IEC 55/626/CDV:1997) 8页
DIN IEC 55/627/CDV-1998 Specifications for particular types of winding wires - Amendment to IEC 60317-38 Clause 18: Heat or solvent bonding (IEC 55/627/CDV:1997) 8页
DIN IEC 55/629/CD-1998 Specifications for particular types of winding wires - Part 54: Polyester enamelled round copper wire, class 155L (IEC 55/629/CD:1997) 12页
DIN IEC 55/640/CD-1998 Packaging of winding wires - Part 5: Cylindrical barrelled delivery spools with conical flanges - Section 2: Specification for recturnable spools made from thermoplastic material (IEC 55/640/CD:1997) 13页
DIN IEC 55/650/CDV-1999 Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 55/650/CDV:1998) 9页
DIN IEC 55/679/CDV-1999 Specification for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 (IEC 55/679/CDV:1999) 12页
DIN IEC 55/712/CD-1999 Modification of IEC 60851-5: Winding wires - Test methods - Part 5: Electrical properties; clause 4: Breakdown voltage; clause 6: Dielectric dissipation factor (IEC 55/712/CD:1999) 31页
DIN IEC 554-2 A3-1996 DIN IEC 554-2-77的修订A3 6页
DIN IEC 56(CO)106-1985 Electrical engineering; equipment reliability testing; part 2: guidance for the design of test cycles for equipment reliability testing; identical with IEC 56(Central Office)106 31页
DIN IEC 56(CO)154-1990 Electrical engineering; reliability stress screening of repairable items manufactured in lots; identical with IEC 56(Central Office)154 89页
DIN IEC 56(CO)156-1992 Guidelines for the collection of dependability related data from the field; identical with IEC 56(Central Office)156 14页
DIN IEC 56(CO)157-1992 Electrical engineering; guide on maintainability of equipment; part 4: diagnostic testing, mathematical concepts in diagnostic testing; identical with IEC 56(Central Office)157 9页
DIN IEC 56(CO)160-1992 Electrical engineering; guide on maintainability of equipment; part 4: diagnostic testing; identical with IEC 56(Central Office)160 26页
DIN IEC 56(CO)162-1992 Procedures for goodness-of-fit tests, confidence intervals and lower confidence limits for Weilbull distributed data; identical with IEC 56(Central Office)162 16页
DIN IEC 56(Sec)351-1993 Formal design review; amendment 1 to IEC 61160:1992; identical with IEC 56(Secretariat)351:1992 6页
DIN IEC 56(Sec)363-1992 Dependability; Software maintenance and enhacement; identical with IEC 56(Secretariat)363 32页
DIN IEC 56(Sec)375-1995 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 56(Sec)375:1994) 64页
DIN IEC 56(Sec)377-1994 Equipment reliability testing - Part 3: Preferred test conditions; Section 5: Test cycle 5: Ground mobile equipment; low degree of simulation (IEC 56(Sec)377:1994) 35页
DIN IEC 56(Sec)402-1995 Mathematical expressions for reliability, maintainability and availability terms (IEC 56(Sec)402:1994) 23页
DIN IEC 56(Sec)410-1995 Risk analysis of technological systems - Application guide (IEC 56(Sec)410:1994) 30页
DIN IEC 56(Sec)423-1995 Application guide on human reliability - Part 1: Sections 1 to 4 (IEC 56(Sec)423:1994) 219页
DIN IEC 56/374/CDV-1995 Practical reliability analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities (IEC 56/374/CDV:1994) 24页
DIN IEC 56/432/CD-1995 Guide for reliability stress screening - Part 2: Electronic components (IEC 56/432/CD) 43页
DIN IEC 56/442/CD-1995 Dependability management - Part 3: Application guide; section 5: Reliability test conditions and statistical test principles (IEC 56/442/CD:1995) 79页
DIN IEC 56/458/CDV-1996 Guide to software dependability through the software life cycle processes (IEC 56/458/CD:1995) 19页
DIN IEC 56/478/CDV-1996 Draft IEC 60300-3-6: Dependability management - Part 3: Application guide; section 6: Software aspects of dependability (IEC 56/478/CDV:1995) 31页
DIN IEC 56/486/CD-1996 IEC 60300-3-7: Dependability management - Part 3: Application guide; section 7: Reliability stress screening of electronic hardware (IEC 56/486/CD:1995) 27页
DIN IEC 56/487/CD-1997 Draft IEC 60300-3-10: Dependability management - Part 3: Application guide; section 10: Maintainability and maintenance support (IEC 56/487/CD:1995) 26页
DIN IEC 56/538/CD-1997 Presentation and specification of reliability data for electronic components (IEC 56/538/CD:1996) 22页
DIN IEC 56/560/CDV-1998 Draft IEC 60300-3-11: Dependability management - Part 3: Application guide Section 11: Reliability centred management (IEC 56/560/CDV:1997) 48页
DIN IEC 56/575/CD-1997 Guide to test methods for reliability assessment of software (IEC 56/575/CD:1997) 19页
DIN IEC 56/581/CD-1998 Giude for Hazard and Operability Studies (HAZOP) (IEC 56/581/CD:1997) 58页
DIN IEC 56/595/CD-1997 Goodness-of-fit and estimation methods for the power law model (IEC 56/595/CD:1997) 39页
DIN IEC 56/629/CD-1999 Dependability management - Part 3: Application guide; Section 13: Project risk management (IEC 56/629/CD:1998) 16页
DIN IEC 56/655/CD-2000 Supporting information to IEC 60300-3-3: Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 56/655/CD:1999) 63页
DIN IEC 56/682/CD-2000 IEC 61720: Guide to techniques and tools for achieving confidence in software (IEC 56/682/CD:1999, text in English) 14页
DIN IEC 56/683/CDV-2000 IEC 60605-4: Statistical procedures for the exponential distrubition - Point estimates, confidence intervals, prediction intervals and tolerance intervals (IEC 56/683/CDV:2000, text in English) 27页
DIN IEC 57(CO)21-1985 Telecontrol equipment and systems; part 1: general principles 32页
DIN IEC 57(Sec)112-1992 Distribution automation using distribution line carrier systems; part 1: general considerations; section one: architecture; identical with IEC 57(Secretariat)112 24页
DIN IEC 57(Sec)113-1992 Distribution automation using distribution line carrier systems; part 1: general considerations; section three: glossary; identical with IEC 57(Secretariat)113 16页
DIN IEC 57(Sec)114-1992 Distribution automation using distribution line carrier systems; part 1: general considerations; section four: identification of transmission parameters concerning medium and low voltage distribution mains; identical with IEC 57(Secretariat)114 12页
DIN IEC 57(Sec)116-1992 Distribution automation using distribution line carrier systems; part 3: mainsborne signalling requirements; section four: narrow band modem; identical with IEC 57(Secretariat)116 22页
DIN IEC 57(Sec)117-1992 Distribution automation using distribution line carrier systems; part 3: mainsborne signalling requirements; section five: interfaces; identical with IEC 57(Secretariat)117 8页
DIN IEC 57(Sec)119-1992 Distribution automation using distribution line carrier systems; part 4: data communication protocols; section 3: data link layer; clause 1: medium access control; identical with IEC 57(Secretariat)119 44页
DIN IEC 57(Sec)199-1995 Distribution automation using distribution line carrier systems - Part 5: Lower layer profiles; Section 1: The Spread Frequency Shift Keying (S-FSK) profile (IEC 57(Sec)199:1994) 65页
DIN IEC 57/226/CD-1995 Distribution automation using distribution line carrier systems - Part 3: Mains signalling requirements; section one: Frequency bands and output levels (IEC 57/226/CD:1995) 22页
DIN IEC 57/255/CDV-1996 Distribution automation using distribution line carrier systems - Part 1: General considerations; Technical Report type 3; section 2: Guide for specification (IEC 57/255/CDV:1995) 46页
DIN IEC 57/272/CDV-1996 Distribution automation using distribution line carrier systems - Part 5: Lower layer profile; Technical Report type 2; section 2: The frequency shift keying (FSK) profile (IEC 57/272/CDV:1996) 57页
DIN IEC 57/330/CD-1998 Distribution automation using distribution line carrier systems - Part 6: A-XDR-encoding rule (IEC 57/330/CD:1997) 44页
DIN IEC 57/332/CD-1998 Distribution automation using distribution line carrier systems - Part 4: Data communication protocols; Section 511: System management using profile 61334-5-1, CIASE protocol (IEC 57/332/CD:1997) 33页
DIN IEC 57/351/CDV-1998 Telecontrol equipment and systems - Part 5: Transmission protocols; Section 101: Companion standard for basic telecontrol tasks; Amendment A1: Extension of time tags (IEC 57/351/CDV:1998) 47页
DIN IEC 57/365/CD-1998 Distribution automation using distribution line carrier systems - Part 3: Mains signalling requirements; Section 22: MV phase-to-earth and screen-to-earth coupling devices (IEC 57/365/CD:1998) 26页
DIN IEC 57/366/CD-1998 Distribution automation using distribution line carrier systems - Part 4: Data communication protocols; Section 512: Systems management using profile IEC 61334-5-1 MIB; Management, Informationsbasis (MIB) (IEC 57/366/CD:1998) 25页
DIN IEC 57/391/CD-1999 Distribution automation using distribution line carrier systems - Part 5-3: Lower Layer Profiles; spread Spectrum Adaptive Wideband (SS-AW) Profile (IEC 57/391/CD:1999, text in English) 24页
DIN IEC 57/454/CD-2000 Draft IEC 60870-6-503, edition 2 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 services and protocol (IEC 57/454/CD:2000); text in English 135页
DIN IEC 57/455/CD-2000 Draft IEC 60870-6-802, edition 2 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 object models (IEC 57/455/CD:2000); text in English 83页
DIN IEC 587-1996 评定在严酷环境条件下使用的电气绝缘材料耐露电起痕性和耐电蚀损的试验方法 11页
DIN IEC 59/142/CDV-1995 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 1: General requirements (IEC 59/142/CDV:1995) 59页
DIN IEC 59/144/CDV-1995 Guidelines for panel testing (IEC 59/144/CDV:1995) 19页
DIN IEC 59/169/CDV-1997 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for fans (IEC 59/169/CDV:1996) 23页
DIN IEC 59/177/CDV-1997 IEC 61923: Performance of household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility (IEC 59/177/CDV:1997) 31页
DIN IEC 59/214/CD-1999 Household electrical hair care appliances - Methods for measuring the performance (IEC 59/214/CD:1999) 32页
DIN IEC 59A/76/CD-1999 Household and similar electrical appliances - Test code for determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers; Amendmend 1 (IEC 59A/76/CD:1998) 20页
DIN IEC 59A/77/CD-1999 Amendment to IEC 60436: Type C reference detergents (IEC 59A/77/CD:1998) 5页
DIN IEC 59B/60/CDV-1997 Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring the performance (IEC 59B/60/CDV:1997) 63页
DIN IEC 59C/79/CDV-1998 Household electric storage room heaters - Methods for measuring the performances; IEC 60531, 2. edition (IEC 59C/79/CDV:1997) 61页
DIN IEC 59D/109/CDV-1996 Methods for measuring the performance of tumbler dryers for household use - IEC 61121, 2nd edition, A1 - Lint content in exhaust air (IEC 59D/109/CDV:1995) 9页
DIN IEC 59D/126/FDIS-1998 Clothes washing machines for household use - Methods for measuring the performance (IEC 59D/126/FDIS:1997) 126页
DIN IEC 59D/127/FDIS-1998 Tumbler dryers for household use - Methods for measuring the performance (IEC 59D/127/FDIS:1997) 43页
DIN IEC 59D/139/CD-1998 Electric clothes washing machines for household use - Methods for measuring the performance; Amendment A1 (IEC 59D/139/CD:1998) 5页
DIN IEC 59D/144/CD-1999 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 59D/144/CD:1998) 21页
DIN IEC 59D/150/CD-1999 Amendment to IEC 61121: Tumble dryers for household use - Methods for measuring the performance; Subclause 6.2.2: Water conductivity (IEC 59D/150/CD:1998) 4页
DIN IEC 59E/114/CDV-1999 Amendment to IEC 60311: Electric irons for household or similar use - Methods for measuring performance; clauses 3, 5, 18 and 22: Auto switch-off devices (IEC 59E/114/CDV:1998) 5页
DIN IEC 59E/116/CD-1999 Electric irons for household use; Amendment to IEC 60311: Irons with steam generator/boiler (IEC 59E/116/CD:1998) 10页
DIN IEC 59E/122/CD-2000 Electric irons for household or similar use - Methods for measuring performance (IEC 59E/122/CD:1999) 76页
DIN IEC 59E/95/CD-1997 Electric irons for household use - Characteristics of performance; Amendment of IEC 60311 (IEC 59E/95/CD:1997) 5页
DIN IEC 59E/96/CDV-1997 Electrical irons for household use - Characteristics of performance - For clarification (shot of steam); Amendment to IEC 60311 (IEC 59E/96/CDV:1997) 4页
DIN IEC 59E/97/CDV-1997 Electrical irons for household use - Characteristics of performance - Scratch resistance of sole-plate; Amendment to IEC 60311, clauses 2 and 8 (IEC 59E/97/CDV:1997) 10页
DIN IEC 59F/73/CD-1996 Methods of measurement of performance of vacuum cleaners for household and similar use - Wet vacuum cleaning tests (Amendment of third edition of IEC 60312) (IEC 59F/73/CD:1995) 6页
DIN IEC 59F/79/CD-1997 Methods of measurement of performance of vacuum cleaners for household and similar use - Fibre removal from carpets of IEC 60312; Amendment to subclause 2.5 (IEC 59F/79/CD:1997) 11页
DIN IEC 59F/80/CD-1997 Methods of measurement of performance of vacuum cleaners for household and similar use - Bump test of IEC 60312; Amendment to subclause 4.6 (IEC 59F/80/CD:1997) 7页
DIN IEC 59F/90/CD-1999 Household and similar electrical appliances - Test code for determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 59F/90/CD:1998) 20页
DIN IEC 59G/74/CD-1997 Electric household coffee makers - Methods for measuring the performance of electric household coffee makers (IEC 59G/74/CD:1997) 18页
DIN IEC 59G/78/CD-1998 Electrical household appliances for grilling - Methods of measuring the performance of electric household portable applicances for cooking, grilling and similar functions (IEC 59G/78/CD + IEC 59G/78/CD:1997) 51页
DIN IEC 59H/75/CDV-1997 Microwave ovens for household use - Characteristics of performance - Visual clarity of see-through ovens (Technical Report Type 2) (IEC 59H/75/CDV:1996) 20页
DIN IEC 59H/76/CDV-1997 Microwave ovens for household use - Characteristics of performance - Revision of IEC 60705 (IEC 59H/76/CDV:1996) 49页
DIN IEC 59K/28/CD-2000 IEC 60705, Edition 3: Household microwave ovens - Methods for measuring performance; Amendment 1 (IEC 59K/28/CD:2000) 4页
DIN IEC 59K/3/CD-1999 Ovens and microwave ovens, cooking ranges and similar appliance (IEC 59K/3/CD:1998) 6页
DIN IEC 60027-3-2004 电气技术用字母符号 第3部分:对数量和单位 15页
DIN IEC 60038-1987 IEC standard voltages; identical with IEC 60038, edition 1983 8页
DIN IEC 60038-2002 IEC标准电压 14页
DIN IEC 60050-131-1983 International Electrotechnical Vocabulary; chapter 131: electric and magnetic circuits 46页
DIN IEC 60050-151-1983 International electrotechnical vocabulary; chapter 151: electrical and magnetic devices 52页
DIN IEC 60050-393-1997 International Electrotechnical Vocabulary - Chapter 393: Nuclear instrumentation; Physical phenomena and basic concepts (IEC 60050(393):1996) 99页
DIN IEC 60050-394-1996 International Electrotechnical Vocabulary - Chapter 394: Nuclear instrumentation; instruments (IEC 60050(394):1995 and IEC 1/1577/FDIS:1995) 109页
DIN IEC 60050-521-2000 International Electrotechnical Vocabulary - Chapter 521: Semiconductor devices and integrated circuits (IEC 60050-521:1984 and IEC 1/1775/CDV:1999) 85页
DIN IEC 60050-551 Ber.1-2000 DIN IEC 60050-551-1999的勘误1 2页
DIN IEC 60050-551 Berichtigung Corrigendum to DIN IEC 60050-551:1999-12 2页
DIN IEC 60050-551-1999 国际电工技术词典.第551部分:电力电子学 28页
DIN IEC 60063-1985 电阻器和电容器优先数 4页
DIN IEC 60068 Bbl.10-1985 Electrotechnic; basic environmental testing procedures; general considerations on ultrasonic cleaning; identical with IEC report 653, edition 1979 5页
DIN IEC 60068 Bbl.2-1983 Basic environmental testing procedures; list of terms 64页
DIN IEC 60068-2-14-1987 Electrical engineering; basic environmental testing procedures; tests; test N: change of temperature; identical with IEC 60068-2-14, edition 1984 (status as of 1986) 9页
DIN IEC 60068-2-18-1991 Electrical engineering; basic environmental testing procedures; test R and guidance: water; identical with IEC 60068-2-18:1989 25页
DIN IEC 60068-2-20-1991 电气工程;基本环境试验程序.试验T:钎焊 15页
DIN IEC 60068-2-28-1991 Electrical engineering; environmental testing; guidance for damp heat tests; identical with IEC 60068-2-28:1990 10页
DIN IEC 60068-2-33-1980 Basic environmental testing procedures; part 2: tests, guidance on change of temperature tests 5页
DIN IEC 60068-2-40-1985 Electrical ingeneering; basic environmental testing procedures; tests; test Z/AM: combined cold/low air pressure tests; identical with IEC 60068-2-40, edition 1976 8页
DIN IEC 60068-2-41-1985 Electrical ingeneering; basic environmental testing procedures; tests; test Z/BM: combined dry heat/low air pressure tests; identical with IEC 60068-2-41, edition 1976 8页
DIN IEC 60068-2-46-1985 电器技术.基本环境试验规程.试验.试验Kd指南:触点和连接件硫化氢试验 9页
DIN IEC 60068-2-48-1984 Basic environmental testing procedures; part 2: tests; guidance on the application of the tests of IEC Publication 60068 to simulate the effects of storage 4页
DIN IEC 60068-2-49-1985 电器技术.基本环境试验规程.试验.试验Kc导则:触点和连接件二氧化硫试验 7页
DIN IEC 60068-2-50-1985 Electrotechnical engineering; basic environmental testing procedures; tests; test Z/AFc: combined cold/vibration (sinusoidal); tests for both-heat-dissipating and non-heat-dissipating specimens; identical with IEC 60068-2-50, edition 1983 8页
DIN IEC 60068-2-51-1985 Electrical engineering; basic environmental testing procedures; tests; test Z/BFc: combined dry heat/vibration (sinusoidal); tests for both heat-dissipating and non-heat-dissipating specimens; identical with IEC 60068-2-51, edition 1983 8页
DIN IEC 60068-2-5-1982 Basic environmental testing procedures; part 2: tests; test Sa: simulated solar radiation at ground level 5页
DIN IEC 60068-2-53-1986 电器工程.基本环境试验规程.试验:试验Z/AFc和Z/BFc指南:温度(低温和干热)和正弦振动组合试验 5页
DIN IEC 60068-2-54-1988 电气工程.基本环境试验规程.试验组T.锡焊.试验Ta.湿润平衡法可焊性试验 8页
DIN IEC 60068-2-9-1987 Electrical engineering; basic environmental testing procedures; tests; guidance for solar radiation testing; identical with IEC 60068-2-2, edition 1975 (status of 1984) 14页
DIN IEC 60068-3-3-1993 环境试验.设备的地震试验方法.导则 32页
DIN IEC 60068-5-1-1994 环境试验.试验方法编写指南.总则 6页
DIN IEC 60068-5-2-1992 Electrical engineering; environmental testing; guide to drafting of test methods; terms and definitions; identical with IEC 60068-5-2:1990 8页
DIN IEC 60072-2-2006 旋转电机的尺寸及功率等级 第2部分：机座号：355-1000和凸缘号：1180-2360 14页
DIN IEC 60094-10-1989 磁带录音和放音系统.第10部分:时间码和地址码 6页
DIN IEC 60094-6-1990 磁带录音和放音系统.双卷盘式磁带系统 18页
DIN IEC 60096-0-1-1999 Radio-frequency cables - Part 0: Guide to the design of detail specifications; Section 1: Coaxial cables (IEC 60096-0-1:1990) 16页
DIN IEC 60098-1989 圆盘唱片和重放设备 22页
DIN IEC 60107-3-2000 电视广播传输用接收机的测量推荐方法.第3部分:多通道声电视接收机用子载系统的电气测量 23页
DIN IEC 60107-4-2000 电视广播传输用接收机的测量推荐方法.第4部分:多通道声电视接收机用双载FM系统的电气测量 14页
DIN IEC 60107-6-1991 电视广播接收机推荐测量方法.第6部分:不同广播信号标准条件下的测量 46页
DIN IEC 60115-1-1987 Fixed resistors for use in electronic equipment; generic specification; identical with IEC 60115-1, edition 1982 (status 1983) 21页
DIN IEC 60115-2-1-1987 电子设备固定电阻器.第2部分:空白详细规范.第1节:低功率非线绕固定电阻器E级评定 9页
DIN IEC 60115-2-1987 电子设备固定电阻器.第2部分:分规范.第1节:低功率非线绕固定电阻器 12页
DIN IEC 60115-2-2-1993 电子设备固定电阻器.第2部分第2节:空白详细规范.低负载非线绕固定电阻器.评定等级 F 8页
DIN IEC 60115-4-1-1987 电子设备固定电阻器.第4部分:空白详细规范.第1节:功率型固定电阻器E级评定 10页
DIN IEC 60115-4-1987 电子设备固定电阻器.第4部分:分规范.第1节:功率型固定电阻器 12页
DIN IEC 60115-4-2-1993 电子设备固定电阻器.第4部分:空白详细规范.大功率固定电阻器.评定等级 F 8页
DIN IEC 60115-5-1-1987 电子设备固定电阻器.第5部分:空白详细规范.第1节:精密固定电阻器 10页
DIN IEC 60115-5-1987 电子设备固定电阻器.第5部分:分规范.第1节:精密固定电阻器 12页
DIN IEC 60115-5-2-1993 电子设备固定电阻器.第5部分:空白详细规范:精密固定电阻器.评定等级 F 8页
DIN IEC 60115-6-1-1986 电子设备固定电阻器.第6部分:空白详细规范.第1节:等阻值等功耗可逐个测量的固定电阻器网络.评定等级 E 10页
DIN IEC 60115-6-1986 电子设备固定电阻器.第6部分:分规范:电阻器可逐个测量的固定电阻器网络 12页
DIN IEC 60115-6-2-1986 电子设备用固定电阻器.第6部分:空白详细规范.第2节:可单独测量的不同电阻值或不同额定功耗的固定电阻器网络.评定等级 E 10页
DIN IEC 60115-7-1-1989 电子设备固定电阻器.第7部分:空白详细规范.第1节:非全部电阻器均可逐个测量的固定电阻器网络.评定等级 E 10页
DIN IEC 60115-7-1989 电子设备固定电阻器.第7部分:分规范.第1节:非所有电阻器均可单独测量的固定电阻器网络 15页
DIN IEC 60118-11-1989 助听器.第11部分:助听器及有关设备的符号和其它标记 8页
DIN IEC 60118-3-1989 助听器.第3部分:不完全戴在听者身上的助听设备 4页
DIN IEC 60118-5-1992 助听器.塞入式耳机塞头 5页
DIN IEC 60118-9-1987 助听器.第9部分:骨振子输出助听器特性测量方法 8页
DIN IEC 60120-1987 绝缘子串元件的球与窝连接尺寸 27页
DIN IEC 60122-2-1-1992 频率控制和选择用石英晶体元件.第2部分:频率控制和选择用石英晶体元件使用导则.第1节:微处理机脉冲源用石英晶体元件 12页
DIN IEC 60122-2-1993 稳率控制和选择用石英晶体元件.第2部分:频率控制和选择用石英晶体元件使用导则 28页
DIN IEC 60122-3-1993 频率控制和选择用石英晶体元件.第3部分:标准外形和引线连接 72页
DIN IEC 60136-3-1980 电机电刷和刷握尺寸.第3部分:碳刷用户IEC技术调查表 4页
DIN IEC 60151-14-1980 电子管电性能测量.第14部分:雷达和示波器阴极射线管测量方法 13页
DIN IEC 60154-3-1985 波导法兰盘.第3部分:扁矩形波导法兰盘有关规范 8页
DIN IEC 60169-7-1997 射频连接器.第7部分:外导体内径为9.5mm(0.374in)卡口锁定特性阻抗为50Ω的射频同轴连接器(C型) 19页
DIN IEC 60191-4-1992 Semiconductor devices; coding system for packages and classification into forms of package outlines; identical with IEC 60191-4:1987 6页
DIN IEC 60235-1-1978 微波管电性能测量.第1部分:术语 31页
DIN IEC 60235-2-1988 微波管电气性能测量.第2部分:一般测量 98页
DIN IEC 60235-3-1978 微波管电性能测量.第3部分:盘封管 10页
DIN IEC 60235-4-1981 微波管电性能测量.第4部分:磁控管 8页
DIN IEC 60235-6-1978 微波管电性能测量.第6部分:大功率速调管 7页
DIN IEC 60244-10-1988 无线电发射机测量方法.第10部分:电视发射机和差转机插入测试信号测量方法 28页
DIN IEC 60244-11-1990 无线电发射机测量方法.第11部分:无线电差转机测量方法 14页
DIN IEC 60244-12-1-1992 无线电发射机测量方法.第12部分:音响设备和电视播放设备用发射机和换位器说明书编写指南.规定特性 13页
DIN IEC 60244-12-2-1992 无线电发射机测量方法.第12部分:音响设备和电视播放设备发射机和换位器的说明书编写指南.单篇规范 10页
DIN IEC 60244-2-1982 无线电发射机测量方法.第2部分:带宽、带外功率和非主振功率 72页
DIN IEC 60244-3-1982 无线电发射机测量方法.第3部分:有用调制和无用调制 46页
DIN IEC 60244-4-1983 无线电发射机测量方法.第4部分:无线电话和播音发射机的幅/频特性及非线性失真 32页
DIN IEC 60244-6-1981 无线电发射机测量方法.第6部分:频率130KHz-1GHz的机箱辐射 31页
DIN IEC 60244-7-1985 无线电发射机测量方法.第7部分:频率1GHz以上的机箱辐射 7页
DIN IEC 60248-1987 核电子仪表原盘尺寸 4页
DIN IEC 60249-3-1-1986 印制电路基材.第3部分:印制电路专用材料.规范no. 1:制造多层印制板用预浸粘结片 8页
DIN IEC 60249-3-3-1994 印制电路基材.第3部分:印制电路专用殊材料.第3号规范:制造印制电路板用永久性聚合物表面覆盖剂(防焊剂) 12页
DIN IEC 60255-11-1992 Electrical relays; interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays; identical with IEC 60255-11:1979 10页
DIN IEC 60255-22-1-1991 继电器.第22部分:测试继电器和保护设备的电干扰试验.第1节:1MHz短脉冲群干扰试验 8页
DIN IEC 60261-1991 加压波导管及其组件密封试验 7页
DIN IEC 60263-1999 铃制频率特性和极座标图用的标度和尺寸 7页
DIN IEC 60268-10-1994 音响系统设备.第10部分:峰值电平计 30页
DIN IEC 60268-11-1995 音响系统设备.第11部分:音响系统部件互连用圆形连接器 22页
DIN IEC 60268-1-1988 音响系统设备.第1部分:总则 14页
DIN IEC 60268-17-1992 音响系统设备.标准音量指示器 5页
DIN IEC 60268-2-1994 音响系统设备.第2部分:通用术语和计算方法解释 11页
DIN IEC 60268-3-1993 Sound system equipment; amplifiers; identical with IEC 268-3-1988 (status as of 1991) 31页
DIN IEC 60294-1986 带两个轴向引出端的圆柱形元件尺寸的测量 4页
DIN IEC 60300-3-10-2004 可靠性管理 第3-10部分：应用指南 可保持性 34页
DIN IEC 60300-3-4-1999 可靠性管理.第3部分:应用导则.第4节:可靠性要求的规定导则 11页
DIN IEC 60301-1985 电容器和电阻器引出端优选直径 3页
DIN IEC 60304-1987 低频电缆和电线绝缘的标准颜色 4页
DIN IEC 60313-2000 Nuclear instrumentation - Coaxial connectors used in laboratory instrumentation (IEC 45/467/CD:1999) 11页
DIN IEC 60313-2002 核仪器用同轴电缆连接器 4页
DIN IEC 60315-1-1991 各类发射的无线电接收机测量方法.第1部分:通用测量(包括声频测量)条件和方法 32页
DIN IEC 60315-5-1981 Methods of measurement on radio receivers for various classes of emission; part 5: specialized radio-frequency measurements; measurement on frequency-modulated receivers of the response to impulsive interference 6页
DIN IEC 60315-6-1999 各种发射类别无线电接收机的测量方法.第6部分:一般用途的通信接收机 16页
DIN IEC 60319-2003 电子元器件可靠性数据的表示和规范 23页
DIN IEC 60325-1999 Radiation protection - Portable and transportable surface contamination meters and monitors for alpha and/or beta radiation (IEC 45B/238/CD:1998) 75页
DIN IEC 60326-10-1993 印制电路板.第10部分:带贯穿连接的刚－挠双面印制电路板规范 31页
DIN IEC 60326-11-1993 印制电路板.第11部分:带贯穿连接的刚性弯曲多层印制电路板要求 39页
DIN IEC 60326-2 A1-1993 Printed boards; part 2: test methods; identical with IEC 60326-2 A1:1992 4页
DIN IEC 60326-2-1992 印制电路板.第2部分:试验方法 34页
DIN IEC 60326-3-1993 印制电路板.第3部分:印制电路板设计和使用 30页
DIN IEC 60326-4-1993 印制电路板.第4部分:带非金属化孔单面和双面印制电路板规范 11页
DIN IEC 60326-5-1993 印制电路板.第5部分:带金属化孔单面和双面印制电路板规范 15页
DIN IEC 60326-7 A1-1994 Printed boards; part 7: specification for single and double sided flexible printed boards without through connections (IEC 60326-7 A1:1989) 2页
DIN IEC 60326-7-1985 印制电路板.第7部分:无贯穿连接的单面或双面挠性印制板要求 15页
DIN IEC 60326-8 A1-1994 Printed boards; part 8: specification for single and double sided flexible printed boards with through connections (IEC 60326-8 A1:1989) 2页
DIN IEC 60326-8-1985 印制电路板.第8部分:有贯穿连接的单面或双面挠性印制板要求 16页
DIN IEC 60326-9-1993 印制电路板.第9部分:带贯穿连接的柔性多层印制电路板要求 39页
DIN IEC 60333-1995 核仪表.半导体带电粒子探测器.试验程序 23页
DIN IEC 60351-1-1981 阴极射线示波器性能表示法.第1部分:总则 42页
DIN IEC 60351-2-1981 阴极射线示波器性能表示法.第2部分:阴极射线示波器 7页
DIN IEC 60357 A1-2000 Tungsten halogen lamps (non-vehicle) - Performance specifications; Amendments to IEC 60357, Ed. 3 (IEC 34A/932/CD:2000) 17页
DIN IEC 60368-2-1-1993 压电滤波器.第2部分:压电滤波器使用指南.第1节:石英晶体滤波器 26页
DIN IEC 60370-1994 绝缘漆耐热性试验规程.电气强度法 7页
DIN IEC 60373-1992 骨传振动器测量用机械耦合器 10页
DIN IEC 60381-1-1985 过程控制系统模拟信号.第1部分:直流电流信号 4页
DIN IEC 60381-2-1980 过程控制系统模拟信号.第2部分:直流电压信号 3页
DIN IEC 60384-10-1-1993 电子设备固定电容器.第10部分:空白分规范:表面安装的多层瓷片固定电容器.评定等级 E 9页
DIN IEC 60384-10-1993 电子设备用固定电容器.第10部分:空白分规范:表面安装的多层瓷片固定电容器 23页
DIN IEC 60384-11-1-1991 电子设备固定电容器.第11部分:分规范:固定聚乙烯-对苯二酸酯薄膜介质金属箔直流电容器.第1节:空白详细规范:固定聚乙烯-对苯二酸酯薄膜介质金属箔直流电容器.评定等级 E 9页
DIN IEC 60384-11-1991 电子设备固定电容器.第11部分:分规范:聚乙烯-对苯二酸酯薄膜介质金属箔直流固定电容器 15页
DIN IEC 60384-12-1-1991 电子设备固定电容器.第12部分:分规范:固定聚碳酸酯薄膜介质金属箔直流电容器.第1节:空白详细规范:金属箔式聚碳酸酯薄膜介质直流固定电容器.评定等级 E 9页
DIN IEC 60384-12-1991 电子设备固定电容器.第12部分:分规范:固定聚碳酸酯薄膜介质金属箔直流电容器 15页
DIN IEC 60384-13-1-1992 电子仪器固定电容器.第13部分:空白详细规范:固定聚丙烯薄膜绝缘金属箔直流电容器 评定等级 E 10页
DIN IEC 60384-13-1992 电子设备固定电容器.第7部分:分规范:固定聚丙烯薄膜绝缘金属箔直流电容器 15页
DIN IEC 60384-15-1-1991 电子设备固定电容器.第15部分:分规范:固体或非固体电解质固定钽电容器.第1节:空白详细规范:非固体电解质和箔电极的固定钽电容器.评定等级 E 12页
DIN IEC 60384-15-1991 电子设备固定电容器.第15部分:分规范:固体或非固体电解质固定钽电容器 19页
DIN IEC 60384-15-2-1991 电子设备固定电容器.第15部分:分规范:固体或非固体电解质固定钽电容器.第2节:空白详细规范:非固体电解质和多孔阳极的固定钽电容器.评定等级 E 12页
DIN IEC 60384-15-3-1991 电子设备固定电容器.第15部分:分规范:固体或非固体电解质固定钽电容器.第3节:空白详细规范:固体电解质和多孔阳极固定钽电容器.评定等级 E 12页
DIN IEC 60384-16-1-1991 电子设备固定电容器.第16部分:分规范:金属化聚丙烯薄膜介质直流固定电容器.第1节:空白详细规范:固定或金属化聚丙烯薄膜介质直流电容器.评定等级 E 11页
DIN IEC 60384-16-1991 电子设备固定电容器 第16部分: 分规范：金属化聚丙烯薄膜介质直流固定电容器 18页
DIN IEC 60384-17-1-1991 电子设备固定电容器.第17部分:分规范:固定金属化聚丙烯薄膜介质交流和脉冲电容器.第1节:空白详细规范:固定金属化聚丙烯薄膜介质交流和脉冲电容器.评定等级 E 13页
DIN IEC 60384-17-1991 电子设备固定电容器.第17部分:分规范:固定金属化聚丙烯薄膜介质交流和脉冲电容器 20页
DIN IEC 60384-18-1-1994 电子设备固定电容器.第18部分:空白详细规范.固体电解质片式铝电解固定电容器.评定级E 12页
DIN IEC 60384-18-1994 电子设备固定电容器.第18部分:分规范:带固体和液体电解质的铅电解质片状固定电容器 19页
DIN IEC 60384-18-2-1994 电子设备固定电容器.第18部分:带液态电解质的铅电解质片状固定电容器.评定等级 E 12页
DIN IEC 60384-19-1-1994 电子设备固定电容器.第19部分:空白详细规范:覆金属聚对苯二甲酸乙酯薄膜介质芯张式直流固定电容器.评定等级 E 10页
DIN IEC 60384-19-1994 电子设备固定电容器.第19部分:覆金属聚对苯二甲酸乙酯薄膜介质芯张式直流固定电容器 16页
DIN IEC 60384-2-1-1991 电子设备用固定电容器.第2部分:空白详细规范:金属化聚乙烯对苯二甲酸乙二酸酯薄膜介质直流固定电容器.评定等级 E 10页
DIN IEC 60384-2-1991 电子设备固定电容器.第2部分:分规范:金属化聚乙烯对苯二甲酸乙二酸脂薄膜介质直流固定电容器 16页
DIN IEC 60384-3-1-1991 电子设备固定电容器.第3部分:分规范:固定式钽片电容器.第1节:空白详细规范:固定式钽片电容器.评定等级 E 11页
DIN IEC 60384-3-1991 电子设备固定电容器.第3部分:分规范:固定式钽片电容器 15页
DIN IEC 60384-4-1-1991 电子设备用固定电容器.第4部分:分规范:固体或非固体电解质铝电解电容器.第1节:空白详细规范:非固体电解质铝电解电容器.E级评定 13页
DIN IEC 60384-4-1991 电子设备固定电容器.第4部分:分规范:固体或非固体电解质铝电解电容器 24页
DIN IEC 60384-4-2-1991 电子设备固定电容器.第4部分:分规范:固体或非固体电解质铝电解电容器.第2节:空白详细规范:固体电解质铝电解电容器.评定等级 E 12页
DIN IEC 60384-5-1-1994 电子设备固定电容器.第5部分:额定电压不超过3000V的固定式直流云母电容器.第1节:评定等级 E 10页
DIN IEC 60384-5-1994 电子设备用固定电容器.第5部分:分规范:额定电压不超过3000V的直流云母固定电容器.试验方法选择和一般要求 16页
DIN IEC 60384-6-1-1992 电子设备用固定电容器.第6部分:空白详细分规范:金属化聚碳酸酯薄膜介质直流固定电容器.评定等级 E级.与IEC60384－6－1987等同 12页
DIN IEC 60384-7-1-1992 电子设备固定电容器.第7部分:空白详细规范:固定聚苯乙烯薄膜绝缘金属箔直流电容器.第1节:评定等级 E 10页
DIN IEC 60384-7-1992 电子设备固定电容器.第7部分:分规范:固定聚苯乙烯薄膜绝缘金属箔直流电容器 18页
DIN IEC 60386-1995 录音和放音设备速度波动测量方法 7页
DIN IEC 603-9-1995 带印制板的频率低于3MHz的连接器.第9部分:印制板、后板二部分份和电缆连接器.基本尺寸2.54mm(0.1in) 61页
DIN IEC 60393-1-1998 电子设备用电位计.第1部分:通用规范 46页
DIN IEC 60404-12-1999 磁性材料.第12部分:层间绝缘镀层的温度性能的评定方法导则 10页
DIN IEC 60404-8-1-2005 磁性材料 第8-1部分：单项材料规范 硬磁材料 30页
DIN IEC 60413-1980 确定电机电刷材料物理性能的试验规程 15页
DIN IEC 60455-3-2-2000 电气绝缘用树脂基活性组分.第3部分:单体材料规范.第2节:石英充填环氧树脂成分 9页
DIN IEC 60467-1978 电机碳刷物理性能测定试验方法 6页
DIN IEC 60468-1981 金属材料电阻率测量方法 12页
DIN IEC 60469-1-1991 脉冲技术和仪器.第1部分:脉冲术语定义 29页
DIN IEC 60469-2-1991 脉冲技术和仪器.第2部分:脉冲测量和分析.总则 10页
DIN IEC 60476-1995 Nuclear instrumentation - Electrical measuring systems and instruments utilizing ionizing radiation sources - General aspects (IEC 60476:1993) 12页
DIN IEC 60483-1988 高机电耦合压电陶瓷动态测量导则 20页
DIN IEC 60487-1-1990 地面无线电中继系统用设备的测量方法.第1部分:子系统和模拟无线电中继系统通用测量方法 36页
DIN IEC 60487-2-1-1987 地面无线电中继系统设备测量方法.第2部分:分系统测量.第1节:总则 3页
DIN IEC 60487-2-2-1987 地面无线电中继系统设备测量方法.分系统测量.备用信道切换开关 16页
DIN IEC 60487-2-3-1988 地面无线电中继系统设备测量方法.第2部分:分系统测量.第3节:射频分支网络 6页
DIN IEC 60487-2-4-1988 地面无线电中继系统设备的测量方法.第2部分:分系统测量.第4节:频率调制器 8页
DIN IEC 60487-2-5-1989 地面无线电中继系统设备的测量方法.第2部分:分系统测量.第5节:频率解调器 9页
DIN IEC 60487-2-6-1992 地面无线电中继系统设备测量方法.第2部分:分系统测量.第6节:分集.双路和热备用设备 16页
DIN IEC 60487-2-7-1989 地面无线电中继系统设备的测量方法.第2部分:分系统测量.第7节:无线电发射机 6页
DIN IEC 60487-2-8-1989 地面无线电中继系统设备的测量方法.第2部分:分系统测量.第8节:无线电接收机 8页
DIN IEC 60487-3-1994 地面无线电中继系统设备的测量方法.第3部分:模拟系统 10页
DIN IEC 60487-3-2-1987 地面无线电中继系统设备测量方法.第3部分:仿真系统.第2节:基带测量 4页
DIN IEC 60487-3-3-1988 地面无线电中继系统设备测量方法.第3部分:仿真系统.第3节:黑白和彩色电视传输测量 26页
DIN IEC 60487-3-4-1987 地面无线电中继系统设备测量方法.第3部分:仿真系统.第4节:分频多路传输测量 11页
DIN IEC 60487-3-5-1988 地面无线电中继系统设备测量方法.第3部分:仿真系统.第5节:互干扰测量 8页
DIN IEC 60487-3-6-1991 地面无线电中继系统设备的测量方法.第3部分:模拟系统.第6节:音响节目传送测量 11页
DIN IEC 60489-1-1981 移动设备用无线电设备测量方法.第1部分:通用定义和标准测量条件 13页
DIN IEC 60489-2-1986 移动业务无线电设备测量方法.第2部分:A3E.F3E或G3E发射的发射机 24页
DIN IEC 60489-3-1986 移动业务无线电设备测量方法.第3部分:A3E或F3E发射的接收机 28页
DIN IEC 60489-4-1986 移动业务无线电设备测量方法.第4部分:单边带发射的(R3E.H3E或J3E)发射机 20页
DIN IEC 60489-5-1989 移动设备用无线电设备的测量方法.第5部分:采用单边带技术(R3E.H3E或J3E)的接收机 51页
DIN IEC 60489-6-1990 移动设备用无线电设备的测量方法.第6部分:选择呼叫和数据设备 64页
DIN IEC 60489-8-1987 移动业务无线电设备测量方法.第8部分:天线 11页
DIN IEC 60510-1-1987 卫星地面站无线电设备测量方法.第1部分:总则 9页
DIN IEC 60510-1-2-1988 卫星地面站无线电设备测量方法.第1部分:分系统和分系统组合件通用测量.第2节:射频范围内的测量 18页
DIN IEC 60510-1-3-1993 卫星地面站无线电设备的测量方法.分系统和分系统组合件测量.中频范围测量 14页
DIN IEC 60510-1-4-1989 卫星地面站无线电设备测量方法.第1部分:分系统和分系统组合件通用测量.第4节:基本频带域中的测量 8页
DIN IEC 60510-1-5-1991 卫星地面站无线电设备测量方法.第1部分:分系统和分系统组合件通用测量.第5节:噪声温度测量 11页
DIN IEC 60510-2-1-1993 卫星地面站无线电设备的测量方法.分系统测量.总则、天线(包括馈线网络) 22页
DIN IEC 60510-2-3-1993 卫星地面站无线电设备的测量方法.分系统测量.低噪声放大器 4页
DIN IEC 60510-2-4-1993 卫星地面站无线电设备测量方法.分系统测量.发射和接收转换器 11页
DIN IEC 60510-2-7-1993 卫星地面站无线电设备的测量方法.子系统测量.大功率放大器 7页
DIN IEC 60510-3-1-1987 卫星地面站无线电设备测量方法.第3部分:分系统组合件测量方法.第1节:总则 4页
DIN IEC 60510-3-2-1987 卫星地面站无线电设备测量方法.第3部分:分系统组合的测量方法.第2节:接收范围为4GHz-6GHz的系统品质因数(G/T)测量 10页
DIN IEC 60510-3-3-1992 卫星地面站无线电设备的测量方法.第3部分:分系统组合件测量方法.第3节:黑白电视和彩色电视传送测量 28页
DIN IEC 60512-2 A1-1995 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests (IEC 60512-2:1985/A1:1994) 2页
DIN IEC 60512-5-1994 Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 5: impact tests (free components), static load tests (fixed components), endurance tests and overload tests; identical with IEC 60512-5:1992 11页
DIN IEC 60512-7-1994 电子设备用机电元件.基本试验程序和测量方法.第7部分:机械操作试验和密封试验 8页
DIN IEC 60512-8-1994 电子设备用机电元件.基本试验程序和测量方法.第8部分:连接器机械试验和接触件及接出端的机械试验 16页
DIN IEC 60512-9-1994 电子设备用机电元件.基本试验规程和测量方法.第9部分:杂项试验 9页
DIN IEC 60516 Bbl.1-1988 CAMAC-system; a modular instrumentation system for data handling; list of published documents 3页
DIN IEC 60516-1987 CAMAC系统.数据处理用模块式仪器系统 38页
DIN IEC 60534-2-4-1990 工业过程控制阀.第2部分:流动能力.第4节:内在流动特性线和调节比例关系 7页
DIN IEC 60534-7-1992 工业过程控制阀.第7部分:.数据表 11页
DIN IEC 60545-1981 Guide for commissioning, operation and maintenance of hydraulic turbines 16页
DIN IEC 60547-1983 符合NIM标准(用于核电子仪器)的插件单元和标准19英寸机架安装单元 18页
DIN IEC 60552-1987 CAMAC-多机箱系统组织.分支信息通道和AI型CAMAC机箱控制器规范 31页
DIN IEC 60559-1992 微处理机系统二进制浮点运算 12页
DIN IEC 60562-1980 电子管入射电离辐射的测量 8页
DIN IEC 60568-1983 动力反应堆中子注量率(通量)测量内芯体仪器 7页
DIN IEC 60568-2006 Nuclear power plants - Instrumentation important to safety - In-core instrumentation for neutron fluence rate (flux) measurements in power reactors (IEC 60568:2006) 16页
DIN IEC 60574-17-1991 视听、视频和电视设备与系统.第17部分:音频学习系统 16页
DIN IEC 60574-18 A1-1991 Audiovisual, video and television equipment and systems; connectors for automatic slide projectors with built-in triacs for audiovisual appliances; amendment 1 4页
DIN IEC 60574-18-1991 视听、视频和电视设备及系统.第18部分:声像用自动幻灯放映机与内装双向三极管开关的连接器 5页
DIN IEC 60576-1985 便携式钻孔测井设备(深至300m).一般特性 11页
DIN IEC 60584-2-1992 热电偶.允差 3页
DIN IEC 60590-1986 新鲜矿物绝缘油中芳香烃含量测定 8页
DIN IEC 60597-1-1980 Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz; part 1: electrical and mechanical characteristics 5页
DIN IEC 60597-2-1980 Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz; part 2: methods of measurements of electrical performance parameters 8页
DIN IEC 60597-3-1986 Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz; part 3: methods of measurement of mechanical properties, vibration and environmental tests; identical with IEC 60597-3, edition 1983 8页
DIN IEC 60597-4-1987 Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz; part 4: guide for the preparation of aerial performance specification; detailed specifications sheet format; identical with IEC 60597-4, edition 1983 8页
DIN IEC 60602-1989 B型螺旋扫描录象机 12页
DIN IEC 60603-11-1995 印制电路板频率低于3MHz连接器.第11部分:同轴连接器详细规范(自由连接器和固定连接器的尺寸) 19页
DIN IEC 60604-1984 Topflash/Flipflash" photographic flash lamp arra 8页
DIN IEC 60605-1-1986 电气工程; 设备可靠性测试.第1部分:一般要求 22页
DIN IEC 60605-3-1-1988 电气工程; 设备可靠性试验.第3部分:优选试验条件.第1节:低模拟度室内便携设备 8页
DIN IEC 60605-3-4-1993 设备可靠性试验.优选试验条件.非固定驱动设备.低模拟度 11页
DIN IEC 60605-4-2002 设备可靠性试验.第4部分:指数分布的统计程序.点估算,置信区限、预测区限和公差带 30页
DIN IEC 60605-6-1999 设备可靠性试验.第6部分:恒定失效率或恒定失效强度假设下的有效性试验 9页
DIN IEC 60605-7-1986 Electrical engineering; equipment reliability testing; part 7: compliance test plans for failure rate and mean time between failures assuming constant failure rate; identical with IEC 60605-7, edition 1978 31页
DIN IEC 60625-1-1981 可编程测量仪的接口系统(字节串行、位并行).第1部分:功能规范、电气规范、机械规范、系统应用和设计者及用户使用要求 92页
DIN IEC 60625-2-1981 可编程测量仪的接口系统(字节串行、位并行).第2部分:代码和格式惯例 17页
DIN IEC 60631-1980 电动和电磁制动系统的特性表述和试验 8页
DIN IEC 60640-1987 CAMAC-串行信息通道接口系统 136页
DIN IEC 60642-1988 频率控制和选择用压电陶瓷谐振子和谐振器.标准值和条件.测量和试验条件 13页
DIN IEC 60642-3-1993 压电陶瓷谐振器.第3部分:标准外形 8页
DIN IEC 60647-1990 电源用磁氧化物磁芯(EC磁芯)尺寸 8页
DIN IEC 60677-1986 CAMAC系统字组转移 20页
DIN IEC 60678-1985 IEC标准使用的CAMAC术语定义 12页
DIN IEC 60679-2-1997 石英晶体受控振荡器.第2部分:石英晶体受控振荡器使用导则 19页
DIN IEC 60692-2001 核仪器.离子辐射的密度仪.定义和试验方法 19页
DIN IEC 60698-1989 电视磁带机测量方法 8页
DIN IEC 60706-1-1986 Electrical engineering; guide on maintainability of equipment; part 1: sections-one, two and three; introduction, requirements and maintainability programme; identical with IEC 60706-1, edition 1982 15页
DIN IEC 60706-2-2001 设备维护导则.第2部分:第5节:设计相位期的维护学习 16页
DIN IEC 60706-3-1990 电气工程.设备维修导则.第3部分:第6节.第7节:数据的验证和采集、分析和表述 13页
DIN IEC 60706-4-1999 设备维修导则.第4部分.第8节:维修和维修保证大纲 16页
DIN IEC 60706-5-2002 设备维护性导则.第5部分:第4节:诊断试验 27页
DIN IEC 60706-6-1995 Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation (IEC 60706-6:1994) 23页
DIN IEC 60706-6-2000 设备维修性导则.第6部分:第9节:维修性评估的方法 14页
DIN IEC 60709-2006 核电厂 对安全重要的测试设备和控制系统 隔离 22页
DIN IEC 60710-2000 Radiation protection - Equipment for measuring and monitoring of airborne tritium - For workplace, installed, portable and transportable systems (IEC 45B/261/CD:1999) 87页
DIN IEC 60711-1986 测量耳塞与人耳匹配用塞耳模拟器 9页
DIN IEC 60713-1985 CAMAC子程序 29页
DIN IEC 60714-1986 Expression of the properties of spectrum analyzers; identical with IEC 60714, edition 1981 15页
DIN IEC 60715-1993 Dimensions of low-voltage switchgear and controlgear; standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations; identical with IEC 715-1981 22页
DIN IEC 60717-1984 具有单向引出终端的电容器和电阻器空间确定方法 4页
DIN IEC 60721-2-1-1992 电气工程.环境条件分类.第2部分:自然环境条件.第1节:温度和湿度 27页
DIN IEC 60721-2-2-1992 电气工程.环境条件分类.第2部分:自然环境条件.第2节:降水和风 8页
DIN IEC 60721-2-3-1990 电气工程.环境条件分类.第2部分:自然环境条件.第3节:气压 4页
DIN IEC 60721-2-4-1990 电气工程.环境条件分类.第2部分:自然环境条件.第4节:太阳辐射和温度 12页
DIN IEC 60721-2-5-1992 Electrical engineering; classification of environmental conditions; environmental conditions appearing in nature; dust, sand, salt mist; identical with IEC 60721-2-5:1991 22页
DIN IEC 60721-2-7-1990 电气工程.环境条件分类.第2部分:自然环境条件.第7节:动物群与植物群 4页
DIN IEC 60723-1-1990 磁氧化物和电源芯.电信用传感器和变压器磁芯.第1部分:总规范 10页
DIN IEC 60723-2-1-1990 磁氧化物和电源芯.电信用电感器和变压器磁芯.第2部分:分规范:电感器磁性氧化物磁芯.第1节:空白详细规范:评定等级 A 6页
DIN IEC 60723-2-1990 磁氧化物和电源芯.电信用电感器和变压器磁芯.第2部分:分规范:电感器磁性氧化物磁芯 6页
DIN IEC 60723-3-1-1990 电信用电感器和变压器磁芯.第3部分:分规范:宽带变压器磁性氧化物磁芯.第1节:空白详细规范:评定等级 A和B 6页
DIN IEC 60723-3-1990 电信用电感器和变压器磁芯.第3部分:分规范:宽带变压器氧化物磁芯.第1节:空白详细规范:A级和B级评定 5页
DIN IEC 60723-4-1-1990 电信用电感器和变压器磁芯.第4部分:分规范:变压器用磁性氧化磁芯和电力扼流圈.第1节:空白详细规范:评定等级 A 7页
DIN IEC 60723-4-1990 电信用电感器和变压器磁芯.第4部分:分规范:变压器用磁性氧化磁芯和电力扼流圈.第1节:空白详细规范:评定等级 A 5页
DIN IEC 60729-1986 CAMAC机箱多重控制器 32页
DIN IEC 60740-2-1995 电信和电子设备变压器和电感器铁芯片.第2部分:软磁金属材料制铁芯片最小漏磁性规范 16页
DIN IEC 60746-4-1996 电化学分析仪性能表示方法.第4部分:用包有薄膜的电流传感器测量水中的溶解氧 17页
DIN IEC 60746-5-1996 电化学分析仪性能表示方法.第5部分:氧化还原电势 8页
DIN IEC 60747-10-1987 半导体器件.第10部分:分立器件和集成电路总规范 18页
DIN IEC 60747-11-1992 半导体器件.第11部分:半导体器件分规范 12页
DIN IEC 60747-1-1987 Semiconductor devices; discrete devices and integrated circuits; general; identical with IEC 60747-1, edition 1983 31页
DIN IEC 60747-2-2001 半导体器件.分立器件和集成电路.第2部分:整流二极管 55页
DIN IEC 60747-3-1-1991 Semiconductor devices; Discrete devices; part 3: signal diodes and regulator diodes; section one: blank detail specification: signal diodes, switching diodes and controlled-avalanche diodes, identical with IEC 60747-3-1:1986 10页
DIN IEC 60747-3-1992 半导体器件.分立器件.第3部分:信号二极管(包括开关二极管和稳压二极管) 34页
DIN IEC 60747-3-2-1992 Semiconductor devices; part 3: signal diodes and regulator diodes; section two: blank detail specification for voltage-regulator diodes and voltage reference diodes; identical with IEC 60747-3-2:1986 10页
DIN IEC 60747-6-1987 Semiconductor devices; discrete devices and integrated circuits; thyristors; identical with CEI 747-6, edition 1983 76页
DIN IEC 60747-6-2-1992 Semiconductor devices; part 6: thyristors; section two: blank detail specification for bidirectional triode thyristors (triacs), ambient or case-rated, up to 100 A; identical with IEC 60747-6-2:1991 10页
DIN IEC 60747-7-1-1992 Semiconductor devices; part 7: bipolar transistors; section one: blank detail specification for low power amplification transistors; identical with IEC 60747-7-1:1989 12页
DIN IEC 60747-7-1997 Semiconductor discrete devices and integrated circuits - Part 7: Bipolar transistors (IEC 60747-7:1988 + A1:1988 + A2:1994) 83页
DIN IEC 60747-7-2-1992 Semiconductor devices; part 7: bipolar transistors; section two: blank detail specification for case-rated transistors for low-frequency amplification; identical with IEC 60747-7-2:1989 11页
DIN IEC 60747-8-1-1991 Semiconductor devices; field-effect transistors; section one: blank detail specification for single-gate field-effect tramsistors up to 5 W and 1 GHz; identical with IEC 60747-8-1:1987 17页
DIN IEC 60747-8-1989 Semiconductor devices; discrete devices; field-effect transistors; identical with IEC 60747-8:1984 32页
DIN IEC 60748-1-1988 Semiconductor devices; integrated circuits; part 1: general; identical with IEC 60748-1, edition 1984 12页
DIN IEC 60748-20-1990 半导体器件.集成电路.第20部分:薄膜集成电路.混合薄膜集成电路总规范 18页
DIN IEC 60748-2-1990 Semiconductor devices; integrate circuits; part 2: digital integrated circuits; identical with IEC 60748-2:1985 97页
DIN IEC 60748-3-1-1994 半导体器件.集成电路.第3部分:摸拟集成电路.第1节:单块集成电路运算放大器空白详细规范 12页
DIN IEC 60748-3-1993 Semiconductor devices; integrated circuits; part 3: analogue integrated circuits; identical with IEC 60748-3:1986 74页
DIN IEC 60757-1986 电工技术工程. 色码 3页
DIN IEC 60760-1991 Flat,quick-connect terminations; identical with IEC 60760:1989 39页
DIN IEC 60761-1-1999 Radiation protection - Equipment for continuously monitoring radioactivity in gaseous effluents - Part 1: General requirements (IEC 45B/242/CD:1999) 66页
DIN IEC 60767-1987 B型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系统 26页
DIN IEC 60773-1985 测量电刷运行特性的试验方法和设备 20页
DIN IEC 60775-1987 计算机辅助测量与控制(CAMAC)用实时BASIC 20页
DIN IEC 60776-1987 Expression of the properties of logic analyzers; identical with IEC 60776, edition 1983 10页
DIN IEC 60780-2000 核电厂.安全系统的电气设备.资格鉴定 26页
DIN IEC 60796-1-1993 8位和16位数据传送微处理机系统总线(多接口总线 I).第1部分:功能描述用电器要求和定时特性 32页
DIN IEC 60796-2-1993 8位和16位数据传送微处理机系统总线(多接口总线 I).第2部分:带直接播塞的系统总线配置用机械安装和播脚布置 8页
DIN IEC 60796-3-1993 8位和16位数据传送用微处理机系统总线I(多接口总线 I).第3部分:带间接播塞的欧洲卡式组件用机械安装和播脚布置 9页
DIN IEC 60807-1-1993 频率低于3MHz的矩形连接器.第1部分:总规范.一般要求 19页
DIN IEC 60809 A2-1999 Filament lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 2 to IEC 60809:1995 (IEC 34A/831/CD:1998) 145页
DIN IEC 60810 A2-1999 Lamps for road vehicles - Performance requirements; Amendment 2 to IEC 60810 (IEC 34A/847/CD:1998) 15页
DIN IEC 60822-1992 IEC 822 VSB.IEC 821VME总线的平行分系统总线 161页
DIN IEC 60839-10-1-1998 报警系统.第10部分:道路交通报警系统.第1节:私家轿车 15页
DIN IEC 60841-1990 录音.脉冲数调制(PCM)编码/解码系统 12页
DIN IEC 60846-2000 Radiation protection - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beat, X and gamma radiation (IEC 45B/263/CDV:1999) 86页
DIN IEC 60852-1-1990 电信和电子设备变压器和电感器的外形尺寸.第1部分:使用YEI-1型叠片的变压器和电感器 11页
DIN IEC 60852-2-1994 电信和电子设备用变压器和电感器的外形尺寸.第2部分:印制电路板安装用带YEx-2芯的变压器和电感器 8页
DIN IEC 60852-5-1995 电信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C铁芯的Q系列变压器和电感器 6页
DIN IEC 60854-1993 Medical ultrasonic equipment; methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment; identical with IEC 60854:1986 32页
DIN IEC 60862-1-1992 表面声波(OFW-)滤波器.第1部分:总则、标准值和试验条件.第 I章:总则和标准值.第2节:试验条件 14页
DIN IEC 60863-1988 电气工程.可靠性、维修性和可用性预测的表述 8页
DIN IEC 60864-1-1989 广播发射机或发射机系统与监控装置互连.专用互连接口标准 20页
DIN IEC 60880-1-1999 Software for computers in the safety systems of nuclear power plants - First supplement: Defences against failures caused by software faults, use of software tools and of pre-developed software (IEC 45A/357/CDV:1999) 69页
DIN IEC 60880-1987 Software for computers in the safety systems of nuclear power stations; identical with IEC 60880, edition 1986 67页
DIN IEC 60880-2-2001 核电站.具有重要安全的计算机软件.第2部分:对于普通失效的防范用软件概述.软件工具和预扩展软件的使用 39页
DIN IEC 60883-1989 录象带色度信号与随机噪声之比的测定方法 11页
DIN IEC 60912-1998 核仪器.计算器逻辑线路的ECL(发射极耦合逻辑) 5页
DIN IEC 60914-1990 电话会议电气及音响设备要求 27页
DIN IEC 60946-1991 过程测量和控制装置的二元直流电压信号 3页
DIN IEC 60971-1994 半导体变流器.变流器连接识别码 17页
DIN IEC 60973-1993 锗γ射线探测器试验程序 32页
DIN IEC 60982-1993 利用连续或断续输出电离辐射的电平测量系统 7页
DIN IEC 60B/258/CD-1995 Helical-scan digital component video cassette recording system using 19 mm magnetic tape, format D1; Amendment (IEC 60B/258/CD:1994) 32页
DIN IEC 61005-2000 Radiation protection - Neutron ambient dose equivalent (rate) meters (IEC 45B/260/CD:1999) 66页
DIN IEC 61019-1-1-1992 表面声波谐振器.第1部分:总则、标准值和试验条件.第1节:总则和标准值 10页
DIN IEC 61019-1-2-1994 表面声波谐振器.第1部分:一般说明,标准值和试验条件.第2节:试验条件 9页
DIN IEC 61019-3-1993 表面声波(SAW)谐振器.第3部分:标准外形和引线连接 18页
DIN IEC 61020-1-1994 电子设备的机电开关.第1部分:总规范 19页
DIN IEC 61020-2-1-1994 电子设备的机电开关.第2部分:旋转开关分规范.第1节:空白详细规范 6页
DIN IEC 61020-2-1994 电子设备的机电开关.第2部分:旋转开关分规范 10页
DIN IEC 61020-3-1-1994 电子设备的机电开关.第3部分:直插式封装开关分规范.第1节:空白详细规范 6页
DIN IEC 61020-3-1994 电子设备的机电开关.第3部分:线路封装开关分规范 9页
DIN IEC 61020-4-1-1994 电子设备的机电开关.第4部分:闸刀开关分规范.第1节:空白详细规范 6页
DIN IEC 61020-4-1994 电子设备的机电开关.第4部分:闸刀开关分规范 8页
DIN IEC 61020-5-1-1994 电子设备的机电开关.第5部分:按钮开关分规范.第1节:空白详细规范 7页
DIN IEC 61020-5-1994 电子设备的机电开关.第5部分:按钮开关分规范 12页
DIN IEC 61020-6-1-1994 电子设备用的机电开关.第6部分:微动开关的分规范.第1节:空白详细规范 6页
DIN IEC 61020-6-1994 电子设备的机电开关.第6部分:微动开关分规范 9页
DIN IEC 61023-1992 Marine speed and distance measuring equipment; operational and performance requirements; methods of testing and required test results; identical with IEC 61023:1990 7页
DIN IEC 61025-1993 故障树分析 10页
DIN IEC 61066-2007 Thermoluminescence dosimetry systems for personal and environmental monitoring (IEC 61066:2006) 66页
DIN IEC 61070-1992 Compliance test procedures for steady-state availability; identical with IEC 61070:1991 36页
DIN IEC 61079-4-1994 12GHz频带卫星广播接收机的测量方法.第4部分:NTSC制式数字副载波系统 12页
DIN IEC 61080-1993 石英振荡器等效电参数测量指南 31页
DIN IEC 61123-1993 可靠性试验.成功率验证试验方案 24页
DIN IEC 61148-1994 阀器件堆和组合装置及电力变流设备的端子标记 13页
DIN IEC 61151-1994 Amplifiers and preamplifiers used with detectors of ionizing radiation; test procedures; identical with IEC 61151:1992 40页
DIN IEC 61178-1-1995 IEC电子元器件质量评定体系规范(IECQ).石英晶体组件.第1部分:总规范 15页
DIN IEC 61178-2-1-1995 IEC电子元器件质量评定体系规范(IECQ).石英晶体组件.第2部分:分规范:能力认可.第1节:空白详细规范 5页
DIN IEC 61178-2-1995 IEC电子元器件质量评定体系规范(IECQ).石英晶体组件.第2部分:分规范:能力批准 19页
DIN IEC 61178-3-1-1995 石英晶体单元.IEC电子元器件质量评定体系规范(IECQ).第3部分:分规范:合格验收.第1节:空白详细规范 9页
DIN IEC 61178-3-1995 IEC电子元器件质量评定体系规范(IECQ).石英晶体组件.第3部分:分规范:合格鉴定批准 10页
DIN IEC 61186-1-1993 电信和电子设备用变压器和电感器.铁芯和组件命名.第1部分:叠片铁芯 5页
DIN IEC 61196-1-1997 Radio-frequency cables - Part 1: Generic specification; general, definitions, requirements and test methods (IEC 61196-1:1995) 108页
DIN IEC 61226-2005 核电站 重要的安全仪表和控制系统 仪表和控制功能的分类 31页
DIN IEC 61246-1995 矩形断面磁性氧化磁芯(E-磁心)及附件.尺寸 9页
DIN IEC 61253-1-1994 压电陶瓷谐振器规范.IEC电子元器件质量评定体系.第1部分:总规范:合格鉴定批准 13页
DIN IEC 61253-2-1-1994 压电陶瓷谐振器规范.IEC电子元器件质量评定体系.第2部分:分规范:合格鉴定批准.第1节:空白详细规范,评定等级 E 10页
DIN IEC 61253-2-1994 压电陶瓷谐振器规范.IEC电子元器件质量评定体系.第2部分:分规范:合格鉴定批准 13页
DIN IEC 61262-7-1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part-7: Determination of the modulation transfer function (IEC 61262-7:1995) 20页
DIN IEC 61304-1996 核仪表.液体闪烁计数系统.性能验证 11页
DIN IEC 61336-1999 核仪器.用离子辐射测量厚度系统.定义和试验方法 25页
DIN IEC 61342-1996 核仪器.多脉冲幅度分析仪.主要特性、技术要求和试验方法 29页
DIN IEC 61428-1999 核仪器.带有伽玛射线检测器的伽玛射线光谱仪的取样容器 9页
DIN IEC 61453-1999 核仪器.放射性核素分析用铊活性碘化钠探测系统.校正和使用方法 10页
DIN IEC 61513-2002 核电厂 具有重要安全作用的系统用控制仪表 系统的一般要求 104页
DIN IEC 61554-2002 设备面板.电侧仪器.板安装尺寸 9页
DIN IEC 61563-2000 Radiation protection - Equipment for measuring specific activity of gamma emitting radionuclides in foodstuffs (IEC 45B/259/CDV:1999) 43页
DIN IEC 61577-1-2000 Radiation protection - Radon and radon decay product measuring instruments - Part 1: General requirements (IEC 45B/267/FDIS:2000, text in English) 68页
DIN IEC 61577-2-2001 辐射防护仪器.氡和氡衰减产品测量仪器.第2部分:氡测量仪器的特殊要求 20页
DIN IEC 61577-3-2003 环境和辐射防护仪表 氡和氡降解产物的测量仪器 第3部分：对氡降解产物测量仪表的特殊要求 31页
DIN IEC 61701-1996 Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:1995) 5页
DIN IEC 61702-1996 Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61702:1995) 6页
DIN IEC 61721-1996 Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test) (IEC 61721:1995) 5页
DIN IEC 61839-2002 核电站.控制室设计.功能分析和指定任务 20页
DIN IEC 61976-2001 核仪器.光谱术.用HPGe伽玛射线光谱术的光谱背景特色 8页
DIN IEC 61F/125/CDV-1996 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for cutting-off grinders (IEC 61F/125/CDV:1995) 37页
DIN IEC 62088-2002 核仪器.闪烁检测器的光电二极管 18页
DIN IEC 62089-2000 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters (IEC 45/463/CD:1999) 70页
DIN IEC 62089-2003 核用仪表 充气α/β比例计数器的校准和应用 36页
DIN IEC 62117-2001 核电站.压力轻水反应堆 22页
DIN IEC 62138-2004 核电厂 仪器使用和控制 安全的重要性 以计算机为基础的系统执行B或C类功能的软件方面 48页
DIN IEC 62198-2002 目标风险管理.应用导则 191页
DIN IEC 62241-2006 核电厂 主控制室 报警功能和故障表示 46页
DIN IEC 628-1995 绝缘液体在电应力下和电离作用下的析气性 18页
DIN IEC 62A/225/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 8 graphical symbols for medical technical equipment - Electrosurgery applications (5777 Pr through 5784 Pr) (IEC 62A/225/CDV:1997) 10页
DIN IEC 62A/226/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 3 graphical symbols for medical, radiological equipment (5378/94, 5642 Pr und 5379/94) (IEC 62A/226/CDV:1997) 5页
DIN IEC 62A/227/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 2 graphical symbols for medical equipment - Tomographic movement (5401 und 5402) (IEC 62A/227/CDV:1997) 4页
DIN IEC 62A/228/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: Graphical symbols for use on medical equipment - Part 4: Ultrasonic diagnostic (5687 Pr through 5724 Pr and 5754 Pr through 5756 Pr) (IEC 62A/228/CDV:1997) 43页
DIN IEC 62A/229/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 12 graphical symbols for general use on medical technical equipment (5757 Pr through 5768 Pr) (IEC 62A/229/CDV:1997) 14页
DIN IEC 62A/230/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 13 graphical symbols for general use on medical technical equipment (5741 Pr through 5753 Pr) (IEC 62A/230/CDV:1997) 15页
DIN IEC 62A/231/CDV-1997 Graphical symbols for use on equipment - Amendment to IEC 60878, Ed. 2: 17 graphical symbols for medical equipment - Lithotripsy equipment (5725 Pr through 5740 Pr and 5769 Pr) (IEC 62A/231/CDV:1997) 19页
DIN IEC 62A/244/CD-1998 Graphical symbols for use on equipment - Amendment to IEC 60417 and revision (or new edition) of IEC 60878; functions of imaging systems (IEC 62A/244/CD:1998) 14页
DIN IEC 62A/245/CD-1998 Graphical symbols for use on equipment - Amendment to IEC 60417 and revision (or new edition) of IEC 60878; radiological equipment and patient support (IEC 62A/245/CD:1998) 15页
DIN IEC 62A/246/CD-1998 Graphical symbols for use on equipment - Amendment to IEC 60417 and revision (or new edition) of IEC 60878; graphical symbols for general use on medical equipment (IEC 62A/246/CD:1998) 25页
DIN IEC 62A/260/CDV-1998 Graphical symbols for use on equipment - Amendment to IEC 60417: Graphical symbol for baby (IEC 62A/260/CDV:1998) 3页
DIN IEC 62B(CO)105-1994 Evaluation and routine testing in medical imaging departments; constancy tests; hard copy cameras (IEC 62B(Central Office)105:1993) 40页
DIN IEC 62B(CO)106-1994 Evaluation and routine testing in medical imaging departments; imaging departments; constancy tests; image display devices (IEC 62B(Central Office)106:1993) 52页
DIN IEC 62B(Sec)184-1993 Medical electrical equipment; characteristics of electro-optical X-ray image intensifiers; determination of the modulation transfer function (IEC 62B(Secretariat)184:1992) 15页
DIN IEC 62B(Sec)219-1994 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; X-ray equipment for mammography; identical with IEC 62B(Secretariat)219:1994 23页
DIN IEC 62B(Sec)227-1994 Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; equipment for digital subtraction angiography; identical with IEC 62B(Sec)227:1994 20页
DIN IEC 62C/119/CDV-1995 Characteristics and test conditions of radionuclide imaging devices - Part 1: Positron emission tomographs (IEC 62C/119/CDV:1995) 49页
DIN IEC 62C/120/CDV-1996 Characteristics and test conditions of radionuclide imaging devices - Part 2: Single photon emission computed tomographs (IEC 62C/120/CDV:1995) 28页
DIN IEC 62D(CO)6-1979 Performance requirements for single channel and multichannel electrocardiographs 56页
DIN IEC 65/216/CD-1998 Function blocks for industrial-process measurement and control systems - Part 1: Architectur (IEC 65/216/CD:1997) 141页
DIN IEC 65/217/CD-1998 Function blocks for industrial-process measurement and control systems - Part 2: Life-cycle support model (IEC 65/217/CD:1997) 34页
DIN IEC 654-2-1995 工业过程测量和控制设备的运行条件.第2部分:动力 8页
DIN IEC 65A/309/CDV-2000 Batch control - Part 2: Data Structures and Guidelines for Languages (IEC 65A/309/CDV:2000) 109页
DIN IEC 65B(Sec)186-1994 Functional dimensions of metal thermowells for thermometer sensors (IEC 65B(Secretariat)186:1993) 20页
DIN IEC 65B(Sec)200-1994 Draft revision of IEC Publication 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing (IEC 65B(Sec)200:1994) 34页
DIN IEC 65B/236/CD-1995 Draft IEC 61131 - Programmable controllers - Part 5: Communication (IEC 65B/236/CD:1995) 80页
DIN IEC 65B/291/CD-1998 IEC 60534-3-1: Industrial-process control valves - Part 3: Dimensions; Section 1: Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 11页
DIN IEC 65B/306/CDV-1997 IEC 61514 - Methods of evaluating the performance of valve positioners with pneumatic outputs for use in industrial process control systems (IEC 65B/306/CDV:1997) 77页
DIN IEC 65B/318/CD-1998 Revision of IEC 60534-3-2: Industrial-process control valves - Part 3: Dimensions; section 2: Face-to-face dimensions for rotary control valves (IEC 65B/318/CD:1997) 7页
DIN IEC 65B/333/CDV-1998 Mating dimensions between differential pressure measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 65B/333/CDV:1997) 24页
DIN IEC 65B/346/CDV-1998 Industrial process control valves - Part 6: Mounting details for attachment of positioners to control valve actuators; Section 2: Positioner mounting on rotary actuators (IEC 65B/346/CDV:1998) 11页
DIN IEC 65B/373/CD-1999 Programmable controllers - Programming languages (IEC 65B/373/CD:1998, text in English) 222页
DIN IEC 65B/388/CDV-1999 IEC 62098: Evaluation methods for microprocessor-based instruments (IEC 65B/388/CDV:1999) 53页
DIN IEC 65B/390/CD-2000 Revision of IEC 60770-2: Guidance for inspection and routine testing of transmitters for use in industrial-process control systems (IEC 65B/390/CD:1999) 22页
DIN IEC 65C/155/CDV-1996 Field bus standard for use in industrial control systems - Part 2: Physical layer specification and service definition (IEC 65C/155/CDV:1996) 55页
DIN IEC 65C/174/CDV-1997 Fieldbus standard for use in industrial control systems - Part 5: Application layer service definition (IEC 65C/174/CDV:1997) 169页
DIN IEC 65C/175/CDV-1997 Fieldbus standard for use in industrial control systems - Part 6: Application layer protocol specification (IEC 65C/175/CDV:1997) 277页
DIN IEC 65C/177/CDV-1997 Fieldbus Standard for use in industrial control systems - Part 1: Introductory guide (IEC 65C/177/CDV:1997) 77页
DIN IEC 65C/178/CDV-1997 Fieldbus standard for use in industrial control systems - Part 3: Data link layer service definition (IEC 65C/178/CDV:1997) 87页
DIN IEC 65C/179/CDV-1997 Fieldbus standard for use in industrial control systems - Part 4: Data link layer protocol specification (IEC 65C/179/CDV:1997) 224页
DIN IEC 65C/191/CD-1998 Fieldbus standard for use in industrial control systems - Part 7: Network and system management, clause 2 (IEC 65C/191/CD:1998) 100页
DIN IEC 65C/220/CD-2000 Function blocks for process control - Part 1: General requirements (IEC 65C/220/CD:1999, text in English) 138页
DIN IEC 65C/241/CDV-2000 Signal polarity requirements for wire media (EC 65C/241/CDV:2000; text in English) 6页
DIN IEC 65C/242/CD-2000 Profile set for continuous and discrete manufacturing (IEC 65C/242/CD:2000, text in English) 210页
DIN IEC 65C/243/CD-2000 Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition; Amendment 1 (IEC 65C/243/CD:2000; text in Englisch) 32页
DIN IEC 65C/244/CD-2000 Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link protocol specification; Amendement 1 (IEC 65C/244/CD:2000; text in Englisch) 173页
DIN IEC 65C/245/CD-2000 Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition; Edition 3 (IEC 65C/245/CD:2000; text in English) 336页
DIN IEC 65C/246/CD-2000 Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition; Amendment A1 (IEC 65C/246/CD:2000, text in English) 136页
DIN IEC 65C/247/CD-2000 Digital data communication for measurement and control - Fieldbus standard for use in industrial control systems - Part 6: Application layer protocol specification; Amendment A1 (IEC 65C/247/CD:2000) 273页
DIN IEC 65D(Sec)10-1995 Draft IEC 61207-3: Expression of performance of gas analysers - Part 3: Paramagnetic oxygen analysers (IEC 65D(Sec)10:1994) 62页
DIN IEC 65D(Sec)9-1995 Draft IEC 60746-6: Expression of performance of electrochemical analysers - Part 6: Dissolved oxygen in water utilizing sensors with bare metal electrodes (IEC 65D(Secretariat)9:1994) 20页
DIN IEC 65D/40/CD-1998 Expression of performance of electrochemical analyzers - Part 1: General (IEC 65D/40/CD:1998) 50页
DIN IEC 65D/42/CDV-1998 A guide to technical enquiry and bid evaluation for analyser systems (IEC 65D/42/CDV:1998) 57页
DIN IEC 65D/44/CDV-1998 Revision of IEC 60746-2 (1982) - Expression of performance of electrochemical analyzers - Part 2: pH value (IEC 65D/44/CDV:1998) 34页
DIN IEC 65D/48/CDV-1999 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 65D/48/CDV:1998) 41页
DIN IEC 679-2-1997 石英晶体受控振荡器.第2部分:振荡器的使用导则 21页
DIN IEC 68(CO)39-1984 Publication 404-8: magnetic materials; part 8: methods of measurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4 32页
DIN IEC 68(CO)68-1990 Magnetic materials; methods of measurement of the specific total losses of magnetic sheet and strip by means of a single sheet tester; identical with IEC 68(Central Office)68 23页
DIN IEC 68(CO)69-1990 Method of test for the determination of surface insulation resistance; identical with IEC 68(Central Office)69 8页
DIN IEC 68(CO)85-1993 Magnetic materials; methods of measurement of the magnetic properties of permanent magnetic (magnetically hard) materials (IEC 68(Central Office)85:1991) 14页
DIN IEC 68(Sec)105-1994 Methods of measurement of density, resistivity and stacking factor of magnetic sheet and strip (IEC 68(Secretariat)105:1993) 32页
DIN IEC 68(Sec)92-1992 Specification for relays magnetic materials (iron and steel); identical with IEC 68(Secretariat)92 26页
DIN IEC 68/140/CDV-1996 Amendment 1 to IEC 60404-11: Magnetic materials - Methods of test for the determination of surface insulation resistance of magnetic sheet and strip (IEC 68/140/CDV:1996) 9页
DIN IEC 68/188/CDV-1998 Magnetic materials - Part 8: Specifications for individual materials; Section 1: Standard specifications for magnetically hard materials (IEC 68/188/CDV:1998) 58页
DIN IEC 68/190/CDV-1999 Methods of measurement of the magnetic properties of magnetically hard materials at elevated temperatures (IEC 68/190/CDV:1998) 22页
DIN IEC 68/192/CD-1999 Amendment 1 to IEC 60404-4: Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel (IEC 68/192/CD:1998) 4页
DIN IEC 68/211/CD-2000 Amendment 1 to IEC 60404-3: Magnetic materials - Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester (IEC 68/211/CD:1999) 5页
DIN IEC 68/212/CD-2000 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz (IEC 68/212/CD:1999) 31页
DIN IEC 68/213/CD-2000 Methods of measurement of the magnetic dipole moment of ferromagnetic material specimen by the withdrawal or rotation method (IEC 68/213/CD:1999) 23页
DIN IEC 684-2-1996 绝缘软套管规范:第2部分:试验方法 44页
DIN IEC 684-3-100 bis 105-1996 绝缘软套管规范.第3部分:套管个别型号的规范要求.第100～105节:PVC挤压套管 18页
DIN IEC 684-3-116 bis 118-1996 绝缘软套管规范.第3部分:套管个别型号的规范要求:第116～118节:通用挤压聚氯丁烯套管 12页
DIN IEC 684-3-121 und 122-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第121和122节:挤压硅橡胶套管 10页
DIN IEC 684-3-201-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求.第201节:收缩比为2:1的交联聚氯乙烯通用热收缩软套管 10页
DIN IEC 684-3-209-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求.第209节:收缩比为2:1的阻燃聚烯烃通用热收缩套管 10页
DIN IEC 684-3-240 bis 243-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第240～243节:热收缩PTFE套管 12页
DIN IEC 684-3-300-1996 绝缘软套管规范.第3部分:套管个别型号的规范要求.第300节:无涂层玻璃纺织纤维编织套管 8页
DIN IEC 684-3-320-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第320节:轻度浸渍的聚对苯二甲酸乙酯织物套管 8页
DIN IEC 684-3-400 bis 402-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第400～402节:用硅树脂弹性体涂层的玻璃织物套管 12页
DIN IEC 684-3-403 bis 405-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第403～405节:用丙烯酸作基底涂层的玻璃织物套管 11页
DIN IEC 684-3-406 bis 408-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第406～408节:用PVC作基底涂层的玻璃织物套管 10页
DIN IEC 684-3-420 bis 422-1996 绝缘软套管规范:第3部分:套管个别型号的规范要求:第420～422节:用丙烯酸作基底涂层的聚对苯二甲酸乙酯织物套管 11页
DIN IEC 7/519/CD-1999 Draft IEC 61989: Overhead electrical conductors - Guide to calculation of sag and tension (IEC 7/519/CD:1999) 77页
DIN IEC 740-2-1995 通用和电子设备用电感器和变压器的铁芯叠片.第2部分:软磁金属材料的铁芯叠片的最低磁导率规范 16页
DIN IEC 746-4-1996 电化学分析仪的性能表示.第4部分:用有薄膜复盖的电流传感器测定水中溶解氧 19页
DIN IEC 746-5-1996 电化学分析仪的性能表示.第5部分:氧化还原电位或氧化还原电势 8页
DIN IEC 747-7-1997 半导体器件.分立器件和集成电路.第7部分:双极晶体管 83页
DIN IEC 75(Sec)163-1993 Classification of environmental conditions, part 2: environmental conditions appearing in nature, section 8: fire exposure (IEC 75(Secretariat)163:1992) 39页
DIN IEC 75(Sec)83-1987 Electrical engineering; classification of environmental conditions; environmental conditions appearing in nature; earthquake vibrations and shocks; identical with IEC 75(Secretariat)83 12页
DIN IEC 75/300/CD-1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; stationary use at weatherprotected locations (IEC 75/300/CD1997) 8页
DIN IEC 75/304/CD-1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 0: Introduction and guide (IEC 75/304/CD:1997) 23页
DIN IEC 78/305/CD-2000 Live working - Terminology for tools and equipment (IEC 78/305/CD:2000) 130页
DIN IEC 795-1996 用缠管法评定软片材料耐热性的试验方法 6页
DIN IEC 8/1159/CD-1996 Possible modification of some values in table V of IEC 60038 (IEC 8/1159/CD:1995) 12页
DIN IEC 80(Sec)75-1993 Global Maritime Distress and Safety System (GMDSS); inmarsat-C ship earth station and inmarsat-EGC (Enhanced Group Call) equipment; performance standards, methods of testing and required test results (IEC 80(Secretariat)75:1993) 47页
DIN IEC 80(Sec)76-1994 Global Maritime Distress and Safety System (GMDSS); COSPAS-SARSAT Satellite Emergency Position Indicating Radio Beacon (EPIRB) operating on 406 MHz; operational and performance requirements, methods of testing and required test results (IEC 80(Secretaria 71页
DIN IEC 80(Sec)80-1994 Global Maritime Distress and Safety System (GMDSS); narrow-band direct printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX); operational and performance requirements, methods 39页
DIN IEC 80/111/CDV-1996 Global Maritime Distress and Safety System (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver; operational and performance requirements, methods of testing and required test results (IEC 80/111/CDV:1995) 73页
DIN IEC 80/156/NP-1997 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results (IEC 80/156/NP:1997) 28页
DIN IEC 80/175/CD-1998 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 4: Multiple talker and multiple listeners; ship control network; Fragment 1: Introduction and general principles (IEC 80/175/CD:1998) 78页
DIN IEC 80/176/CD-1998 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 4: Multiple talker and multiple listeners; ship control network; Fragment 2: Protocol definition (IEC 80/176/CD:1998) 162页
DIN IEC 80/266/CD-2000 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Operational and performance requirements; methods of testing and required test results (IEC 80/266/CD:2000) 99页
DIN IEC 82/179/CDV-1997 Procedure for measuring the efficiency of power conditioners used in photovoltaic systems (IEC 82/179/CDV:1997) 20页
DIN IEC 82/238/CD-2000 Certification and accreditation for photovoltaic (PV) components and systems (IEC 82/238/CD:2000) 29页
DIN IEC 85/147/CDV-1997 Draft IEC 61554: Dimensions for panel mounted indicating and recording electrical measuring instruments (IEC 85/147/CDV:1997) 21页
DIN IEC 85/194/CD-1999 Amendment 2 to IEC 60688: Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals (IEC 85/194/CD:1998) 8页
DIN IEC 85/86/CDV-1997 Amendment 1 to IEC 60688, 2. edition: Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals (IEC 85/86/CDV:1996) 7页
DIN IEC 852-5-1995 通信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C芯Q系列的变压器和电感器 6页
DIN IEC 86/106/CDV-1997 IEC 61745: End-face image analysis procedure for the calibration of optical fibre geometry test sets (IEC 86/106/CDV:1996) 84页
DIN IEC 86/110/CDV-1997 Measuring method for optical crosstalk of duplexer and diplexer modules (IEC 86/110/CDV:1997) 7页
DIN IEC 86/81/CDV-1998 IEC 61290-3: Basic specification for optical fibre amplifier test methods - Part 3: Test methods for noise parameters (IEC 86/81/CDV:1995) 18页
DIN IEC 86A/380/CDV-1997 Proposed Amendment to IEC 60793-1-4, edition 5 (IEC 86A/380/CDV:1996) 22页
DIN IEC 86A/395/CDV-1997 Proposed amendment to IEC 60793-1-3 (IEC 86A/395/CDV:1997) 12页
DIN IEC 86A/396/CDV-1997 Proposed amendment to IEC 60794-2 (IEC 86A/396/CDV:1997) 15页
DIN IEC 86A/399/CD-1997 Length measurement of an optical fibre or cable by the phase shift method (IEC 86A/399/CD:1997) 17页
DIN IEC 86A/405/CD-1997 Amendment to IEC 60793-1-4: Optical fibres - Part 1-4: Generic specification; measuring methods for transmission and optical characteristics (IEC 86A/405/CD:1997) 17页
DIN IEC 86A/407/CD-1997 Amendment of IEC 60794-1-3, clauses 7 and 8 (IEC 86A/407/CD:1997) 6页
DIN IEC 86A/408/CDV-1997 Amendment to IEC 60793-1-1 (IEC 86A/408/CDV:1997) 6页
DIN IEC 86A/424/CDV-1998 Proposed new edition 4 of IEC 60793-2 - Optical fibres - Part 2: Product specification (IEC 86A/424/CDV:1997) 56页
DIN IEC 86A/466/CD-1999 Optical fibres product specification; Amendment 2 to IEC 60793-2 (IEC 86A/466/CD:1998) 10页
DIN IEC 86B(Sec)263-1993 Fibre optics interconnecting devices and passiv components; blank detail specifikation; connector-set for optical fibres and cables; environmental category 5; identical with IEC 86B(Secretariat)263:1992 13页
DIN IEC 86B(Sec)264-1993 Fibre optics interconnecting devices and passiv components; blank detail specification; connector-set for optical fibres and cables; environmental category 6; identical with IEC 86B(Secretariat)264:1992 13页
DIN IEC 86B(Sec)265-1993 Fibre optics interconnecting devices and passiv components; blank detail specifikation; connector-set for optical fibres and cables; environmental category 99; identical with IEC 86B(Secretariat)265:1992 12页
DIN IEC 86B/1006/CD-1997 Amendment to fibre optic connector interfaces - Part 7: Type MPO connector family (MPO connector flat interface) (IEC 86B/1006/CD:1997) 15页
DIN IEC 86B/1007/CD-1997 Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 86B/1007/CD:1997) 52页
DIN IEC 86B/1008/CD-1997 Fibre optic connector interfaces - Part 16: Fibre optic connector (duplex) Type PN (modified F07) for plastic optical fibre (POF) and hard polymer clad silicia fibre (HCF) (IEC 86B/1008/CD:1997) 25页
DIN IEC 86B/1009/CD-1997 Reliability of fibre optic interconnecting devices and passive optical components - Part 3: Failure modes and failure mechanisms for passiv optical components (IEC 86B/1009/CD:1997) 34页
DIN IEC 86B/1011/CD-1997 Revision of IEC 61300-3-17: Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-17: Examinations and measurement; endface angle of angle-polished ferrules (IEC 86B/1011/CD:1997) 28页
DIN IEC 86B/1012/CD-1997 Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-7: Examinations and measurement; wavelength dependence of attenuation and return loss (IEC 86B/1012/CD:1997) 17页
DIN IEC 86B/1013/CD-1997 Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 2-24: Tests; screen testing of ceramic alignment sleeve by stress application (IEC 86B/1013/CD:1997) 22页
DIN IEC 86B/1014/CD-1997 Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-wavelength selective branching devices for external weather protected usage and for telecommunication applications (IEC 86B/1014/CD:1997) 17页
DIN IEC 86B/1015/CD-1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements: Polarization dependence of a single-mode fibre optic device (IEC 86B/1015/CD:1997) 25页
DIN IEC 86B/1016/CD-1997 Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-24: Examinations and measurements; keying accuracy of optical connectors for polarisation maintaining fibre (IEC 86B/1016/CD:1997) 17页
DIN IEC 86B/1019/CD-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements; measurement methods of the inside and outside diameter of fibre optic connector ferrules (IEC 86B/1019/CD:1997) 14页
DIN IEC 86B/1038/CDV-1998 IEC 61300-2-45: Fibre connecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests; durability by water immersion (IEC 86B/1038/CDV:1997) 9页
DIN IEC 86B/1039/CDV-1998 IEC 61300-2-43: Fibre connecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests; method for screen testing of return loss of single mode PC optical fibre connectors (IEC 86B/1039/CDV:1997) 10页
DIN IEC 86B/1043/CDV-1998 Examinations and measurements - Return loss measurement by optical frequency domain reflectometry (Amendment 2 to IEC 61300-3-6 as method 4) (IEC 86B/1043/CDV:1997) 18页
DIN IEC 86B/1047/CDV-1998 IEC 61754-13 - Fibre optic connector interfaces - Part 13: Type FC-PC connector family (IEC 86B/1047/CDV:1997) 31页
DIN IEC 86B/1055A/CD-1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Test method for screen testing of attenuation of single-mode tuned angled optical fibre connectors (IEC 86B/1055A/CD:1997) 11页
DIN IEC 86B/1057/CDV-1998 IEC 61300-3-33: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements; ferrule withdrawal force (IEC 86B/1057/CDV:1997) 15页
DIN IEC 86B/1058/CD-1998 Amendment to fibre optic connector interfaces - Part 7: Type MPO connector family (addition of MPO connector backplane interface) (IEC 86B/1058/CD:1997) 24页
DIN IEC 86B/1062/CD-1998 IEC 61754-10: Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family (IEC 86B/1062/CD:1997) 35页
DIN IEC 86B/1064/CD-1998 Fibre optic passive dispersion compensators - Part 1: Generic specification (IEC 86B/1064/CD:1997) 45页
DIN IEC 86B/1068/CD-1998 Generic specification for fibre optic isolators (IEC 86B/1068/CD:1997) 45页
DIN IEC 86B/1069/CD-1998 Fibre optic interconnecting devices and passive components - Part 2-4: Fibre optic fixed attenuators without pigtails for external weather protected usage (IEC 86B/1069/CD:1997) 16页
DIN IEC 86B/1070/CD-1998 Fibre optic interconnecting devices and passive components - Part 2-5: Performance standard of fibre optic fixed attenuators with two single mode fibre pigtails for external weather protected usage (IEC 86B/1070/CD:1997) 19页
DIN IEC 86B/1071/CD-1998 Fibre optic interconnecting devices and passive components - Part 2-6: Performance standard of fibre optic continuously variyble attenuators with two pigtails for external weather protected usage (IEC 86B/1071/CD:1997) 19页
DIN IEC 86B/1073/CDV-1998 IEC 62005-4: Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening (IEC 86B/1073/CDV:1998) 13页
DIN IEC 86B/1075/CD-1998 IEC 61753-1: Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance (IEC 86B/1075/CD:1998) 26页
DIN IEC 86B/1076/CD-1998 IEC 61753-2-1: Fibre optic interconnecting devices and passive components - Performance standard - Part 2-1: Single mode connectors for category U; Uncontrolled environment (IEC 86B/1076/CD:1998) 42页
DIN IEC 86B/1080/CD-1998 Revision of 61300-3-4: Attenuation (IEC 86B/1080/CD:1998) 26页
DIN IEC 86B/1081/CD-1998 Fibre optic spatial switches - Part 1: Generic specification (IEC 86B/1081/CD:1998) 46页
DIN IEC 86B/1090/CDV-1998 IEC 60874-1: Connectors for optical fibres and cables - Part 1: Generic specification (IEC 86B/1090/CDV:1998) 58页
DIN IEC 86B/1092/CD-1998 Generic specification - Fibre optic WDM (IEC 86B/1092/CD:1998) 60页
DIN IEC 86B/1093/CD-1998 Generic specification - Non-wavelength selective fibre optic branching devices (IEC 86B/1093/CD:1998) 57页
DIN IEC 86B/1094/CDV-1998 IEC 61754-12: Fibre optic connector interfaces - Part 12: Type FS connector family (IEC 86B/1094/CDV:1998) 47页
DIN IEC 86B/1112/CDV-1998 IEC 61073-1: Generic specification for mechanical splices and fusion splice protectors for optical fibres and cables (IEC 86B/1112/CDV:1998) 46页
DIN IEC 86B/1113/CD-1998 IEC 61977-1: Passive optical filters - Part 1: Generic specification (IEC 86B/1113/CD:1998) 48页
DIN IEC 86B/1115/CDV-1999 IEC 60869-1: Fibre optic attenuators - Part 1: Generic specification (IEC 86B/1115/CDV:1998) 47页
DIN IEC 86B/1116/CD-1999 IEC 62005-1: Reliability of fibre optic interconnecting devices and passive components for optical communications - Part 1: Introductory guide and definitions (IEC 86B/1116/CD:1998) 28页
DIN IEC 86B/1117/CD-1999 IEC 61753-3-2: Performance standard - Part 2-2: Fibre optic DWDM Devices for Controlled Environment Usage (IEC 86B/1117/CD:1998) 18页
DIN IEC 86B/1119/CD-1999 IEC 61754-4-5: Fibre optic connector interfaces - Part 4-5: Type SC connector family; PC and APC active device receptacle (IEC 86B/1119/CD:1998) 34页
DIN IEC 86B/1126/CD-1999 Amendment 1 to IEC 61754-6: Fibre optic connector interfaces - Part 6: Type MU connector family (MU) respectacle connector interface (IEC 86B/1126/CD:1998) 20页
DIN IEC 86B/1131/CD-1999 IEC 62077-1: Fibre optic circulators - Part 1: Generic specification (IEC 86B/1131/CD:1998) 47页
DIN IEC 86B/1146/CD-1999 Fibre optic circulators for category U - Uncontrolled environments - Performance standard (IEC 86B/1146/CD:1998) 16页
DIN IEC 86B/1147/CD-1999 Fibre optic isolators for category U - Uncontrolled environments - Performance standard (IEC 86B/1147/CD:1998) 16页
DIN IEC 86B/1157/CD-1999 Fibre optic wavelength switches - Part 1: Generic specification (IEC 86B/1157/CD:1998) 49页
DIN IEC 86B/1176/CD-1999 IEC 62005-2: Example of quantitative assessment of reliability based on accelerated ageing test - Part 2A: Temperature and humidity; steady state (IEC 86B/1176/CD:1998) 31页
DIN IEC 86B/1299/CD-2000 IEC 61754-8: Fibre optic connector interfaces - Part 18: Type MT-RJ connector family (IEC 86B/1299/CD:1999) 34页
DIN IEC 86B/907/CD-1997 Detail specification for fibre optic connector type SC-PC PREMIUM for multimode fibre type A1a, A1b (IEC 86B/907/CD:1996) 35页
DIN IEC 86B/908/CD-1997 Detail specification for fibre optic connector type SC-APC tuned 8 for single mode fibre type B1 (IEC 86B/908/CD:1996) 40页
DIN IEC 86B/909/CD-1997 Detail specification for fibre optic connector type SC-APC untuned 8 for single mode fibre type B1 (IEC 86B/909/CD:1996) 40页
DIN IEC 86B/910/CD-1997 Detail specification for fibre optic connector type SC-PC (floating duplex) standard for multimode fibre type A1a, A1b (IEC 86B/910/CD:1996) 37页
DIN IEC 86B/911/CD-1997 Detail specification for fibre optic adaptor (duplex) type SC for single-mode fibre connectors (IEC 86B/911/CD:1996) 33页
DIN IEC 86B/912/CD-1997 Detail specification for fibre optic adaptor (duplex) type SC for multi-mode fibre connectors (IEC 86B/912/CD:1996) 30页
DIN IEC 86B/913/CD-1997 Detail specification for fibre optic connector (floating duplex) type SC-PC PREMIUM for multi-mode fibre type A1a, A1b (IEC 86B/913/CD:1996) 34页
DIN IEC 86B/916/CD-1997 Amendment to fibre optic connector interfaces - Part 4: Type SC connector family (SC duplex connector interface (Part 4.2)) (IEC 86B/916/CD:1996) 22页
DIN IEC 86B/917/CD-1997 Detail specification for fibre optic connector type SC-PC (rigid duplex) standard for multi-mode fibre type A1a, A1b (IEC 86B/917/CD:1996) 37页
DIN IEC 86C/141/CDV-1997 IEC 61280-4-2: Fibre optic communication subsystem basic test procedures - Part 4-2: Test procedures for fibre optic cable plant; single-mode fibre optic cable plant attenuation measurement (IEC 86C/141/CDV:1996) 25页
DIN IEC 86C/163/CDV-1997 IEC 61281-1: Fibre optic communication system design guides - Part 1: Design guide for single-mode digital and analogue systems (IEC 86C/163/CDV:1997) 64页
DIN IEC 86C/171/CD-1998 IEC 61284-1: Fibre optic terminal devices interfaces - Part 1: General and guidance (IEC 86C/171/CD:1997) 38页
DIN IEC 86C/172/CD-1998 IEC 61284-2: Fibre optic terminal devices interfaces - Part 2: Type SC-SIP terminal device family (IEC 86C/172/CDV:1997) 15页
DIN IEC 86C/191/CD-1998 Performance specification template - Part 3: Optical fibre amplifiers for analoque applications (IEC 86C/191/CD:1998) 19页
DIN IEC 86C/192/CD-1998 Performance specification template - Part 4: Optical fibre amplifiers for multichannel applications (IEC 86C/192/CD:1998) 28页
DIN IEC 86C/206/CD-1998 Fibre optic communication subsystem basic test procedures - Part 2: Test procedures for digital systems; section 8: Accelerated measurement of low BER in digital fibre optic systems (IEC 86C/206/CD:1998) 29页
DIN IEC 86C/208/CDV-1998 IEC 61290-3-1: Basic specification for optical fibre amplifier test methods - Part 3: Test methods for noise figure parameters; Section 1: Optical spectrum analyzer test method (IEC 86C/208/CDV:1998) 30页
DIN IEC 86C/209/CD-1998 Basic specification for optical amplifier test methods - Part 3-2: Test method for noise figure parameters; electrical spectrum analyser test method (IEC 86C/209/CD:1998) 37页
DIN IEC 86C/96/CDV-1997 IEC 61280-4-1: Fibre optic communication subsystem basic test procedures - Part 4-1: Test procedures for fibre optic cable plant; section 1: Multimode fibre optic cable plant attenuation measurement (IEC 86C/96/CDV:1995) 19页
DIN IEC 87/149/CDV-1999 Ultrasonics - Field safety - Part 1: Classification scheme for medical diagnostic ultrasonic fields (IEC 87/149/CDV:1998) 36页
DIN IEC 87/150/CDV-1999 Ultrasonics - Field characterisation - Test methods for the determination of thermal and mechanical exposure parameters for the purposes of defining the safety classification of medical diagnostic ultrasonic fields (IEC 87/150/CDV:1998) 104页

标准获取办法：

在线提交	点击提交信息  （推荐）
电话联系	010-8334-5348  刘老师
电子邮件	wwtrans@126.com

 

查看完整版本：DIN 德语标准数据库参考目录 29

© 标准规范中文版翻译

Powered by skycc.Archivers Author:圣捷